HMC304MS8 / 304MS8E v01.0705 GaAs MMIC HIGH IP3 SINGLEBALANCED SMT MIXER, 1.7 - 3 GHz Typical Applications Features The HMC304MS8 / HMC304MS8E is ideal for: High Dynamic Range: +30 dBm IIP3 • PCS & 3G No External Components or Bias Required • 2.4 GHz ISM LO/RF Isolation: 30 dB • MMDS Ultra Small MSOP8 Package: 14.8 mm2 Functional Diagram General Description MIXERS - SGL-BAL - SMT 9 The HMC304MS8 & HMC304MS8E are passive high IP3 mixers in 8 lead plastic surface mount Mini Small Outline Packages (MSOP). This miniature single balanced MMIC mixer is constructed of GaAs Schottky diodes and novel planar transformer baluns on the chip while not requiring any external components. The RF port is balanced via the MMIC balun while the LO port is connected directly to the diodes. LO isolations are typically 20 to 30 dB. Excellent input IP3 performance of +27 to +32 dBm make the HMC304MS8(E) ideal for high dynamic range applications. Electrical Specifi cations*, TA = +25° C LO = +17 dBm IF = 100 MHz Parameter Min. Typ. LO = +17 dBm IF = 100 MHz Max. Min. Typ. Units Max. Frequency Range, RF & LO 1.7 - 3.0 2.2 - 2.7 GHz Frequency Range, IF DC - 0.8 DC - 0.8 GHz Conversion Loss 9 11 9 10.5 dB Noise Figure (SSB) 9 11 9 10.5 dB LO to RF Isolation 20 30 23 32 dB LO to IF Isolation 12 20 17 25 dB IP3 (Input) 25 30 27 32 dBm 1 dB Gain Compression (Input) 15 19 18 19.5 dBm *Specifi cations are for downconverter performance. Similar results are achieved when using mixer as an upconverter with a resulting input IP3 of 5dB less. 9 - 160 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC304MS8 / 304MS8E v01.0705 GaAs MMIC HIGH IP3 SINGLEBALANCED SMT MIXER, 1.7 - 3 GHz Conversion Gain vs. Temperature @ LO = +17 dBm Isolation @ LO = +17 dBm 0 -10 -5 -10 -40 C +25 C +85 C -15 -20 RF/IF LO/RF LO/IF -40 -20 -50 1 1.25 1.5 1.75 2 2.25 2.5 2.75 3 3.25 3.5 1 1.25 1.5 1.75 FREQUENCY (GHz) 2.25 2.5 2.75 3 3.25 3.5 3 3.25 3.5 Return Loss @ LO = +17 dBm 0 -5 -5 RETURN LOSS (dB) 0 -10 +19 dBm +17 dBm +15 dBm +13 dBm -15 2 FREQUENCY (GHz) Conversion Gain vs. LO Drive -10 -15 RF -20 LO -20 1 1.25 1.5 1.75 2 2.25 2.5 2.75 3 3.25 3.5 1 1.25 1.5 1.75 FREQUENCY (GHz) 2 2.25 2.5 2.75 FREQUENCY (GHz) If Bandwidth @ LO = +17 dBm IF CONVERSION GAIN & RETURN LOSS (dB) CONVERSION GAIN (dB) 9 -30 MIXERS - SGL-BAL - SMT ISOLATION (dB) CONVERSION GAIN (dB) 0 0 Conversion Gain -5 -10 -15 IF Return Loss -20 0 0.25 0.5 0.75 1 1.25 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 161 HMC304MS8 / 304MS8E v01.0705 GaAs MMIC HIGH IP3 SINGLEBALANCED SMT MIXER, 1.7 - 3 GHz Input IP3 vs. Temperature @ LO = +17dBm 40 40 38 38 36 36 34 34 IP3 (dBm) 9 IP3 (dBm) Input IP3 vs. LO Drive 32 30 28 30 28 26 26 24 20 1.5 1.75 2 2.25 2.5 2.75 +25 C -40 C +85 C 24 +19 dBm +17 dBm +15 dBm 22 22 3 3.25 20 1.5 3.5 1.75 2 FREQUENCY (GHz) 2.25 2.5 2.75 3 3.25 3.5 FREQUENCY (GHz) P1dB vs. Temperature @ LO = +17 dBm 25 24 23 +85 C -40 C +25 C 22 P1dB (dBm) MIXERS - SGL-BAL - SMT 32 21 20 19 18 17 16 15 1.5 1.75 2 2.25 2.5 2.75 3 3.25 3.5 FREQUENCY (GHz) MxN Spurious Outputs Harmonics of LO nLO 0 1 2 3 4 0 xx -20 -11 2 7 1 10 0 32 29 31 2 50 61 62 52 59 3 89 90 93 85 81 4 >107 >107 >107 RF = 2 GHz @ -10 dBm LO = 1.9 GHz @ +17 dBm All values in dBc relative to the IF power level. 9 - 162 nLO Spur at RF Port mRF >107 >107 LO Frequency (GHz) 1 2 3 1.5 34 18 32 49 1.9 34 18 32 48 2.3 32 22 36 58 2.7 25 26 39 73 3.1 23 29 35 64 3.6 17 31 36 57 4 LO = +17 dBm Values in dBc below input LO level measured at the RF port. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC304MS8 / 304MS8E v01.0705 GaAs MMIC HIGH IP3 SINGLEBALANCED SMT MIXER, 1.7 - 3 GHz Absolute Maximum Ratings RF / IF Input +27 dBm LO Drive +27 dBm DC Current into IF Port ±9 mA Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 9 MIXERS - SGL-BAL - SMT Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC304MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC304MS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H304 XXXX [2] H304 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 163 HMC304MS8 / 304MS8E v01.0705 GaAs MMIC HIGH IP3 SINGLEBALANCED SMT MIXER, 1.7 - 3 GHz Recommended PCB Layout MIXERS - SGL-BAL - SMT 9 List of Materials for Evaluation PCB 102781 [1] Item Description J1, J2, J3 PCB Mount SMA RF Connector U1 HMC304MS8 / HMC304MS8E Mixer PCB [2] 102643 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 9 - 164 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown below. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board as shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC304MS8 / 304MS8E v01.0705 GaAs MMIC HIGH IP3 SINGLEBALANCED SMT MIXER, 1.7 - 3 GHz Notes: MIXERS - SGL-BAL - SMT 9 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 165