HITTITE HMC346G8

HMC346G8
v03.1008
ATTENUATORS - SMT
5
GaAs MMIC HERMETIC SMT VOLTAGEVARIABLE ATTENUATOR, DC - 8 GHz
Typical Applications
Features
The HMC346G8 is ideal for:
Wide Bandwidth: DC - 8 GHz
• Basestation Infrastructure
Low Phase Shift vs. Attenuation
• Fiber Optics & Broadband Telecom
30 dB Attenuation Range
• Microwave Radio & VSAT
8 Lead Hermetic SMT Package
• Military Radios, Radar, & ECM
• Test Instrumentation
General Description
Functional Diagram
The HMC346G8 is an absorptive Voltage Variable
Attenuator (VVA) in an 8 lead glass / metal (hermetic) surface-mount package operating from DC 8 GHz. It features an on-chip reference attenuator
for use with an external op-amp to provide simple
single voltage attenuation control, 0 to -3V. The
device is ideal in designs where an analog DC
control signal must control RF signal levels over
a 30 dB amplitude range. Applications include
AGC circuits and temperature compensation of
multiple gain stages in microwave radios and test
instrumentation.
Electrical Specifi cations, TA = +25° C, 50 ohm system
Parameter
Insertion Loss
Attenuation Range
DC - 8 GHz
Return Loss
DC - 8 GHz
Switching Characteristics
5 - 84
Min
DC - 6 GHz
DC - 8 GHz
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
Input Power for 0.25 dB Compression (0.5 - 8 GHz)
Min. Atten.
Atten. >2 dB
Input Third Order Intercept (0.5 - 8 GHz)
(Two-tone Input Power = -8 dBm Each Tone)
Min. Atten.
Atten. >2 dB
7
Typical
Max
Units
2.0
2.0
3.0
3.5
dB
dB
30
dB
10
dB
2
8
ns
ns
+8
-2
dBm
dBm
+25
+10
dBm
dBm
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC346G8
v03.1008
GaAs MMIC HERMETIC SMT VOLTAGEVARIABLE ATTENUATOR, DC - 8 GHz
-1
-2
-3
+ 25C
- 40C
+ 85C
-4
-5
-20
-30
-40
0
1
2
3
4
5
FREQUENCY
6
7
8
0
1
2
3
4
5
FREQUENCY (GHz)
6
7
8
Relative Attenuation, Control Voltage
Optimized for 8 GHz Operation
Return Loss vs. Attenuation
0
0
-5
ATTENUATION (dB)
RETURN LOSS (dB)
-10
ATTENUATORS - SMT
0
ATTENUATION (dB)
INSERTION LOSS (dB)
0
-10
-15
-10
-20
-30
-20
5 dB
10 dB
15 dB
20 dB
25 dB
30 dB
-40
-25
0
1
2
3
4
5
6
7
FREQUENCY (GHz)
8
9
0
10
Relative Attenuation vs.
Control Voltage @ 4 GHz
1
2
3
4
5
FREQUENCY (GHz)
6
7
8
Relative Attenuation vs.
Control Voltage @ 8 GHz
0
0
V1 + 25C
V2 + 25C
V1 - 40C
V2 - 40C
V1 + 85C
V2 + 85C
-0.5
-1
CONTROL VOLTAGE (Vdc)
CONTROL VOLTAGE (Vdc)
5
Relative Attenuation, Control Voltage
Optimized for 4 GHz Operation
Insertion Loss vs. Temperature
-1.5
-2
-2.5
-3
V1 + 25C
V2 + 25C
V1 - 40C
V2 - 40C
V1 + 85C
V2 + 85C
-0.5
-1
-1.5
-2
-2.5
-3
0
5
10
15
20
RELATIVE ATTENUATION (dB)
25
30
0
5
10
15
20
25
30
RELATIVE ATTENUATION (dB)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 85
HMC346G8
v03.1008
GaAs MMIC HERMETIC SMT VOLTAGEVARIABLE ATTENUATOR, DC - 8 GHz
5
Input Third Order
Intercept vs. Attenuation*
Relative Phase
30
5 dB
10 dB
15 dB
20 dB
25 dB
30 dB
40
25
IP3 (dBm)
50
RELATIVE PHASE (DEG)
30
15
10
10
0
5
0
1
2
3
4
5
FREQUENCY (GHz)
6
7
0
8
1
2
4
5
6
80
60
70
40
30
0 dB
3 dB
6 dB
10 dB
20
10
8
7
8
60
50
40
0 dB
3 dB
30
6 dB
10 dB
20
0
1
2
3
4
5
6
7
8
0
1
2
FREQUENCY (GHz)
3
4
5
6
FREQUENCY (GHz)
1 dB Compression vs. Attenuation
0.25 dB Compression vs. Attenuation
20
20
0 dB (REF)
5 dB
15
INPUT P1dB (dBm)
15
10
5
0
10
5
0 dB (REF)
5 dB
0
-5
-5
0
1
2
3
4
5
6
FREQUENCY (GHz)
7
8
0
1
2
3
4
5
6
FREQUENCY (GHz)
*Two-tone input power = -8 dBm each tone.
5 - 86
7
Second Harmonic vs. Attenuation
70
50
INPUT.25dB COMPRESSION (dBm)
3
FREQUENCY (GHz)
Input Second Order
Intercept vs. Attenuation*
IP2 (dBm)
0 dB
3 dB
6 dB
10 dB
20
20
SECOND HARMONIC (dBc)
ATTENUATORS - SMT
60
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7
8
HMC346G8
v03.1008
GaAs MMIC HERMETIC SMT VOLTAGEVARIABLE ATTENUATOR, DC - 8 GHz
RF Input Power
+18 dBm
Control Voltage Range
+1 to -5V
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
ATTENUATORS - SMT
5
Absolute Maximum Ratings
NOTES:
1. PACKAGE MATERIAL: ALUMINA LOADED BOROSILICATE GLASS.
2. LEAD, BASE, COVER MATERIAL: KOVAR™ (#7052 CORNING).
3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER
ELECTROLYTIC NICKEL 50 MICROINCHES MIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. TOLERANCES: ±.005 [0.13] UNLESS OTHERWISE SPECIFIED.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 87
HMC346G8
v03.1008
GaAs MMIC HERMETIC SMT VOLTAGEVARIABLE ATTENUATOR, DC - 8 GHz
ATTENUATORS - SMT
5
Pin Descriptions
Pin Number
Function
Description
1, 8
RF1, RF2
This pin is DC coupled and matched to 50 Ohm. Blocking
capacitors are required if RF line potential is not equal to 0V.
2, 7
GND
This pin must be DC grounded.
3, 6
V2, V1
Control Input (Master).
4
I
Control Input (Slave).
5
O
This pin must have an external 500 Ohm resistor to ground.
Interface Schematic
Single-Line Control Driver
Note:
External op-amp control circuit maintains impedance match while attenuation is varied. Input control ranges from 0 Volts (min. attenuation) to -2.5
Volts (max. attenuation.)
5 - 88
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC346G8
v03.1008
GaAs MMIC HERMETIC SMT VOLTAGEVARIABLE ATTENUATOR, DC - 8 GHz
5
ATTENUATORS - SMT
Evaluation PCB
List of Materials for Evaluation PCB 104095
Item
Description
J1 - J2
PCB Mount SMA RF Connector
J3 - J7
DC PIN
U1
HMC346G8
PCB [2]
104093-2 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
[1]
The circuit board used in the final application
should be generated with proper RF circuit design
techniques. Signal lines at the RF ports should be
50 ohm impedance and the package ground leads
and package bottom should be connected directly
to the PCB RF ground plane, similar to that shown
above. The evaluation circuit board shown above is
available from Hittite Microwave Corporation upon
request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 89