HMC849LP4CE v01.1009 HIGH ISOLATION SPDT NON-REFLECTIVE SWITCH, DC - 6 GHz Typical Applications Features The HMC849LP4CE is ideal for: High Isolation: up to 60 dB • Cellular/4G Infrastructure Single Positive Control: 0/+3V to +5V • WiMAX, WiBro & Fixed Wireless High Input IP3: +52 dBm • Automotive Telematics Non-Reflective Design • Mobile Radio “All Off” State • Test Equipment 24 Lead 4x4 mm QFN Package: 16 mm2 Functional Diagram General Description The HMC849LP4CE is a high isolation non-reflective DC to 6 GHz GaAs pHEMT SPDT switch in a low cost leadless surface mount package. The switch is ideal for cellular/WiMAX/4G Infrastructure applications yielding up to 60 dB isolation, low 0.8 dB insertion loss and +52 dBm input IP3. Power handling is excellent up through the 5 - 6 GHz WiMAX band with the switch offering a P1dB compression point of +31 dBm. On-chip circuitry allows a single positive voltage control of 0/+3V or 0/+5V at very low DC currents. An enable input (EN) set to logic high will put the switch in an “all off” state. SWITCHES - SPDT - SMT 14 Electrical Specifi cations, TA = +25 °C, Vctl = 0/Vdd, Vdd = +3V to +5V, 50 Ohm System Parameter Frequency Insertion Loss DC - 2.0 GHz 2.0 - 4.0 GHz 4.0 - 6.0 GHz Isolation (RFC to RF1/RF2) DC - 2.0 GHz 2.0 - 4.0 GHz 4.0 - 6.0 GHz Return Loss (On State) DC - 4.0 GHz 4.0 - 6.0 GHz Return Loss (Off State) Min. 53 48 40 DC - 6.0 GHz Input Power for 1 dB Compression +3V +5V Input Third Order Intercept (Two-Tone Input Power = +7 dBm Each Tone) Typ. Max. Units 0.8 1.0 1.7 1.3 1.5 2.5 dB dB 60 55 52 dB dB 17 13 dB dB 15 dB 30 35 dBm dBm DC - 6.0 GHz 52 dBm DC - 4.0 GHz 80 150 ns ns 0.35 - 4.0 GHz 29 34 Switching Speed tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 14 - 212 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC849LP4CE v01.1009 HIGH ISOLATION SPDT NON-REFLECTIVE SWITCH, DC - 6 GHz Return Loss [1] Insertion Loss 0 -5 -1 RETURN LOSS (dB) -2 -3 +25C +85C -40C -4 RFC RF1, RF2 ON RF1, RF2 OFF -10 -15 -20 -25 -5 -30 0 1 2 3 4 5 6 7 0 1 2 FREQUENCY (GHz) Isolation Between Ports RFC and RF1 / RF2 0 -10 -10 ISOLATION (dB) ISOLATION (dB) 5 6 7 14 RFC-RF1 ON RFC-RF2 ON -20 RF1 RF2 ALL OFF -30 4 Isolation Between Ports RF1 and RF2 0 -20 3 FREQUENCY (GHz) -40 -50 -30 -40 -50 -60 -60 -70 -70 -80 -80 0 1 2 3 4 5 6 0 7 1 2 3 4 5 6 7 FREQUENCY (GHz) FREQUENCY (GHz) 0.1 and 1 dB Input Compression Point, Vdd = 5V, Linear 0.1 and 1 dB Input Compression Point, Vdd = 3V, Linear INPUT COMPRESSION (dBm) INPUT COMPRESSION (dBm) 40 35 30 0.1 dB Compression Point 1dB Compression Point 25 20 30 SWITCHES - SPDT - SMT INSERTION LOSS (dB) 0 25 0.1 dB Compression Point 1 dB Compression Point 20 15 15 0 1 2 3 4 FREQUENCY (GHz) 5 6 0 1 2 3 4 5 6 FREQUENCY (GHz) [1] RFC is reflective in “all off” state. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 14 - 213 HMC849LP4CE v01.1009 HIGH ISOLATION SPDT NON-REFLECTIVE SWITCH, DC - 6 GHz 0.1 and 1 dB Input Compression Point, Vdd = 5V 0.1 and 1 dB Input Compression Point, Vdd = 3V 35 INPUT COMPRESSION (dBm) INPUT COMPRESSION (dBm) 40 0.1 dB Compression Point 1 dB Compression Point 35 30 25 20 15 0.01 0.1 0.1 dB Compression Point 1 dB Compression Point 30 25 20 15 0.01 1 0.1 FREQUENCY (GHz) 60 60 55 55 50 +25C +85C -40C 45 50 +25C +85C -40C 45 40 40 0 1 2 3 4 5 6 0 1 2 3 4 FREQUENCY (GHz) FREQUENCY (GHz) Input Third Order Intercept Point, Vdd = 5V Input Third Order Intercept Point, Vdd = 3V 60 55 55 IP3 (dBm) 60 50 +25C +85C -40C 45 40 0.01 0.1 FREQUENCY (GHz) 14 - 214 Input Third Order Intercept Point, Vdd = 3V, Linear IP3 (dBm) IP3 (dBm) Input Third Order Intercept Point, Vdd = 5V, Linear IP3 (dBm) SWITCHES - SPDT - SMT 14 1 FREQUENCY (GHz) 6 50 +25C +85C -40C 45 1 5 40 0.01 0.1 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 1 HMC849LP4CE v01.1009 HIGH ISOLATION SPDT NON-REFLECTIVE SWITCH, DC - 6 GHz Absolute Maximum Ratings Bias Voltage & Current Bias Voltage (Vdd) 7V Control Voltage (Vctl, EN) -1V to Vdd +1V RF Input Power * Through Path 3V/5V Termination Path 3V/5V Channel Temperature 30.60 / 33 dBm 26.4 dBm Vdd (V) Idd (Typ.) (mA) 3 0.80 5 0.85 150 °C Continuous Pdiss (T = 85 °C) (derate 17.6 mW/°C for through path, and 6.8 mW/°C for termination path above 85 °C) Through Path Termination Path Digital Control Voltages 1.144 W 0.441 W State Bias Condition Low 0 to +0.8 Vdc @ <1 μA Typical High +2.0 to +5.0 Vdc @ 30 μA Typical Thermal Resistance (channel to package bottom) 56.8 °C/W 147.3 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A Truth Table Control Input * The RF input power is quite lower than the breakdown power levels. Hence, the only concern with this product is the thermal limit. Signal Path State Vctl EN RFC - RF1 RFC - RF2 Low Low OFF ON High Low ON OFF Low High OFF OFF High High OFF OFF ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 14 SWITCHES - SPDT - SMT Through Path Termination Path 14 - 215 HMC849LP4CE v01.1009 HIGH ISOLATION SPDT NON-REFLECTIVE SWITCH, DC - 6 GHz Outline Drawing SWITCHES - SPDT - SMT 14 14 - 216 NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish HMC849LP4CE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL Rating MSL1 [2] Package Marking [1] H849 XXXX [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 °C For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC849LP4CE v01.1009 HIGH ISOLATION SPDT NON-REFLECTIVE SWITCH, DC - 6 GHz Pin Descriptions Function Description 1 Vdd Supply Voltage. 2 Vctl Control input. See truth and control voltage tables. 3, 9, 12 RFC, RF1, RF2 These pins are DC coupled and matched to 50 Ohms. Blocking capacitors are required. 4, 6, 7, 8, 13, 14, 15, 16 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 5 EN Enable. See truth and control voltage tables. 10, 11 GND Package bottom must also be connected to PCB RF ground. Interface Schematic Application Circuit For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 14 SWITCHES - SPDT - SMT Pin Number 14 - 217 HMC849LP4CE v01.1009 HIGH ISOLATION SPDT NON-REFLECTIVE SWITCH, DC - 6 GHz Evaluation PCB SWITCHES - SPDT - SMT 14 List of Materials for Evaluation PCB 106975 [1] Item Description J1 - J3 PC Mount SMA RF Connector J4 - J8 DC Pin C1 - C4 100 pF Capacitor, 0402 Pkg. U1 HMC849LP4CE SPDT Switch PCB [2] 106965 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25FR 14 - 218 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 Ohm impedance and the package ground leads and backside ground slug should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC849LP4CE v01.1009 HIGH ISOLATION SPDT NON-REFLECTIVE SWITCH, DC - 6 GHz Notes: SWITCHES - SPDT - SMT 14 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 14 - 219