MBRF1630CT thru MBRF16150CT REVERSE VOLTAGE - 30 to 150Volts FORWARD CURRENT - 16.0 Amperes SCHOTTKY BARRIER RECTIFIERS ITO-220AB FEATURES ●Metal of silicon rectifier , majority carrier conduction .138(3.5) .122(3.1) .118(3.0) .102(2.6) ●Guard ring for transient protection ●Low power loss,high efficiency .406(10.3) .386(9.8) ●High current capability,low VF .189(4.8) .173(4.4) .118(3.0) .106(2.7) ●High surge capacity ●Plastic package has UL flammability classification 94V-0 .610(15.5) .571(14.5) ●For use in low voltage,high frequency inverters,free .157(4.0) .142(3.6) wheeling,and polarity protection applications .071(1.8) .055(1.4) .571(14.5) .531(13.5) MECHANICAL DATA .059(1.5) .043(1.1) .030(0.76) .020(0.51) .112(2.84) .088(2.24) ●Case: ITO-220AB molded plastic ●Polarity: As marked on the body ●Weight: 0.08ounces,2.24 grams ●Mounting position :Any .114(2.9) .098(2.5) .030(0.76) .020(0.51) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% SYMBOL MBRF 1630CT MBRF 1640CT MBRF 1650CT MBRF 1660CT Maximum Recurrent Peak Reverse Voltage VRRM 30 40 50 60 80 100 150 V Maximum RMS Voltage VRMS 21 28 35 42 56 70 105 V VDC 30 40 50 60 80 100 150 V CHARACTERISTICS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current ( See Fig.1) MBRF MBRF MBRF 1680CT 16100CT 16150CT UNIT I(AV) 16.0 A IFSM 150 A Peak Forward Surage Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Peak Forward IF=8A @TJ=25℃ 0.84 0.75 0.85 1.05 Voltage (Note1) IF=8A @TJ=125℃ 0.57 0.65 0.75 0.92 0.72 - 0.95 - - 0.85 IF=16A @TJ=25℃ VF - IF=16A @TJ=125℃ Maximum DC Reverse Current @TJ=25℃ at Rated DC Bolcking Voltage @TJ=125℃ Typical Junction Capacitance (Note2) Typical Thermal Resistance (Note3) Operating Temperature Range Storage Temperature Range IR CJ V - 0.3 0.1 10 5 400 200 mA pF RθJC 3.0 ℃/W TJ -55 to +150 ℃ TSTG -55 to +175 ℃ NOTES:1.300us pulse width,2% duty cycle. 2.Measured at 1.0 MHZ and applied reverse voltage of 4.0V DC. 3.Thermal resistance junction to case. ~ 262 ~ RATING AND CHARACTERTIC CURVES MBRF1630CT thru MBRF16150CT FIG. 1 – FORWARD CURRENT DERATING CURVE FIG. 2 – MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES 16.0 12.0 8.0 4.0 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD 0 25 50 75 100 125 150 175 300 PULSE WIDTH 8.3 ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 250 200 150 100 50 0 1 2 CASE TEMPERATURE (℃) 100 FIG.4-TYPICAL FORWARD CHARACTERISTICS FIG.3-TYPICAL REVER CHARACTERISTICS 1000 100 100 INSTANTANEOUS FORWARD CURRENT, (A) MBRF1630CT - MBRF1660CT MBRF1680CT - MBRF16150CT 10 T J=125℃ 1.0 0.1 T J=25℃ 0.01 0 20 40 60 80 100 120 140 MBRF1630CT MBRF1640CT 10 MBRF1650CTMBRF1660CT MBRF1680CT MBRF16100CT MBRF16150CT 1.0 T J = 25°C PULSE WIDTH 300us 2% DUTY CYCLE 0.1 0.1 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) 0.2 0.3 1000 MBRF1630CT MBRF1660CT MBRF1680CT MBRF16150CT 100 T J = 25°C f = 1 MHz 10 0.1 0.4 0.5 0.6 0.7 0.8 0.9 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 – TYPICAL JUNCTION CAPACITANCE CAPACITANCE, (pF) INSTANTANEOUS REVERSE CURRENT(mA) 10 20 50 5 NUMBER OF CYCLES AT 60Hz 1 4 10 REVERSE VOLTAGE ,VOLTS ~ 263 ~ 100 1.0