ICL351-LS 3-phase VRD/POL Inductor Applications •VRDs (Imbedded) •VRMs (Module) •POLs •VRM 10.x / VRM11 based designs •DDR2/3 memory Features •Design for use with IKOR’s proprietary coupled inductor multi-phase DC-DC converter topology •Low height and small size allows use in both imbedded (VRD) and module (VRM) applications •Integrated design lowers cost and simplifies assembly The ICL351-LS, a 3-phase inductor assembly using IKOR’s coupled inductor technology, solves the most pressing problem facing IA-32 VRDs. This patented technology solves the trade-off between efficiency and elimination of bulk capacitors by dramatically lowering the VRM output inductance while using industry-standard components and relatively low switching frequencies. This technology provides superior transient response performance to higher frequency solutions due to the unique method of coupling between phases, and enables high-current designs with little or no electrolytic output bypass capacitance. The ICL351-LS 3-phase coupled inductor assembly is designed for VRD applications. Its integrated design allows it to fit the inductors very close to the CPU socket in VRD applications. This device can also be used in high current System VRM (SVRM) applications where small size, high efficiency, and low total BOM cost is critical. Inductor Assembly Electrical Specifications Parameter Test Conditions Min Typ Ls (1-6) 1.0 Vrms @ 500 kHz 471 589 707 nH Ls (2-3) 1.0 Vrms @ 500 kHz 471 589 707 nH Ls (4-5) 1.0 Vrms @ 500 kHz 471 589 707 nH LL (1-6) short 2,3 1.0 Vrms @ 1MHz 384 480 576 nH LL (1-6) short 4,5 LL (2-3) short 4,5 DCR (1-6) DCR (2-3) 1.0 Vrms @ 1MHz 1.0 Vrms @ 1MHz 25° C 25° C 384 379 1.06 0.61 480 474 1.18 0.68 576 569 1.3 0.75 nH nH mΩ mΩ 25° C 0.61 0.68 0.75 mΩ DCR (4-5) Specifications subject to change without notice. Electrical specifications at 25˚C unless noted otherwise. Max Unit (12/09) ICL351-LS-1 ICL351-LS VRD/POL Inductor VRD/POL Inductor • ICL451-1 Inductor Assembly units: mm Front View Top View ������������ ��� ��� ��������������������������� ��� Side View � � � � Schematic � �������� � Layout � ������� ��� • � � ��� � � � ��� � � ��� � � � ��� � units: mm Application Schematic The technology utilized in conjunction with the coupled inductor (“the CL”) described in this data sheet includes intellectual property (the “IP”) owned by iWatt, Inc. and is covered by one or more of the following U.S. patents: 6,545,450; 6,686,727; 6,696,823. In connection with the end customer’s purchase of the CL from “ICE Components, Inc.”, the end customer is hereby granted a non-exclusive, worldwide, royalty-free license (without rights to sublicense) to use and incorporate the IP in the end customer’s product that also incorporates the CL. In no way does this license extend to customer end products which do not incorporate the CL to implement the IP. Specifications subject to change without notice. 800.729.2099 tel www.icecomponents.com (12/09) ICL351-LS-2