Advanced Technical Information CS 20-22moF1 VDRM = VRRM = 2200 V = 18 A IT(AV) ITSM = 200 A High Voltage Phase Control Thyristor in High Voltage ISOPLUS i4-PACTM VRSM VRRM VDSM VDRM V V 2100 2000 Type 1 CS 20-22moF1 5 Features Thyristors Conditions Maximum Ratings VDRM, VRRM 2200 V 18 16 A A IT(AV) IT(AV) sine 180°; TC = 90°C square; d = 1/3; TC = 90°C ITSM sine 180°; t = 10 ms; VR = 0 V; TVJ = 25°C 200 A (di/dt)cr TVJ = TVJM repetitive, IT = 40 A f = 50 Hz, tP = 200 µs VD = 2/3 VDRM IG = 0.45 A non repetitive, IT = 20 A diG/dt = 0.45 A/µs 100 A/µs 250 A/µs 2500 V/µs (dv/dt)cr TVJ = TVJM; VDR = 2/3 VDRM RGK = ¥; method 1 (linear voltage rise) Applications Symbol Conditions VT IT VGT IGT VD = 6 V 2.3 V 250 mA VGD IGD TVJ = TVJM; VD = 2/3 VDRM 0.2 V 5 mA IL tP = 10 ms; VD = 6 V IG = 0.45 A; diG/dt = 0.45 A/µs 500 mA IH VD = 6 V; RGK = ¥ 150 mA tgd VD = ½ VDRM IG = 0.45 A; diG/dt = 0.45 A/µs IR, ID VR = VRRM; VD = VDRM;TVJ = 25°C TVJ = 125°C RthJC Characteristic Values (TVJ = 25°C, unless otherwise specified) min. typ. max. = 20 A; TVJ = 25°C TVJ =125°C DC current IXYS reserves the right to change limits, test conditions and dimensions. © 2000 IXYS All rights reserved • high voltage thyristor - for line frequency - chip technology for long term stability • ISOPLUS i4-PACTM high voltage package - isolated back surface - enlarged creepage towards heatsink - enlarged creepage between high voltage pins - application friendly pinout - high reliability - industry standard outline 1.3 1.3 1.5 2 2 V V • controlled rectifiers - power supplies - drives • AC switches • capacitor discharge control - flash tubes - x ray and laser generators µs 50 µA mA 0.92 K/W 022 Symbol 1-2 CS 20-22moF1 Component Symbol Dimensions in mm (1 mm = 0.0394") Conditions Maximum Ratings TVJ Tstg VISOL IISOL £ 1 mA; 50/60 Hz FC mounting force with clip Symbol Conditions dS,dA dS,dA A pin - K pin pin - backside metal RthCH with heatsink compound Weight © 2000 IXYS All rights reserved -40...+125 -55...+125 °C °C 2500 V~ 20...120 N Characteristic Values min. typ. max. 7 5.5 mm mm 0.15 K/W 9 g 2-2