Oscillator · PECL · VCXO SMD PECL VCXO · 7.5 x 5.2 mm ■ ■ ■ ■ actual size uses quartz crystal at fundamental mode and PLL high pulling range ± 150 ppm complementary PECL output, low EMI ceramic/metal package General Data RoHS 2002/95/EC RoHS compliant Pb free: pins / pads Table 1: Frequency Stability Code stability code B C ± 50 ppm ± 25 ppm -10 °C ~ +70 °C O O -40 °C ~ +85 °C O type JVE75B frequency range 12.0 ~ 800.0 MHz frequency stability over all* ± 25ppm / ± 50ppm (see table 1) frequency pulling range min. ± 150ppm pulling control voltage 1.65 V ± 1.5 V pulling control input imped. min. 60 kΩ * includes stability at 25 °C, operating temp. range, supply voltage change, shock and vibration, aging 1st year. current consumption 120mA max. Enable / Disable Function supply voltage VDC 3.3 V ± 5% pin #2 (e/d control) pin #4 / #5 (outputs) temperature operating -10 °C ~ +70 °C / -40 °C ~ +85 °C open or ≥ 2.4 V active storage -40 °C ~ +85 °C gnd or ≤ 0.4 V high impedance rise & fall time 1.0ns (20% ~ 80% of Vpp)* load nom. 50Ω at 1.3 V low level max. 1.7 V high level min. 2.2 V O available Control Voltage Characteristic ppm standby function yes output enable time max. 10ms output disable time max. 50ns start-up time max. 10ms phase jitter 12 kHz ~ 20.0 MHz < 5.0ps RMS 0symmetry at 50% of Vpp 45% ~ 55% typ. (40% ± 60% max.) 0.825 1.65 2.45 3.3 control voltage (V) ■ frequency pulling range output • standard ■ To avoid phase noise or FM modulation in the output frequency spectrum, we recommend to feed the Vcontrol input pin by a low source impedance. * 0.5ns, if >100.0 MHz Dimensions 2 x 2.54 0.1 #1 #2 #3 0.1 0.1 1.4 top view side view 2.0 0.1 2 x 2.54 4.2 2.6 1.6 max. 0.1 5.0 max. 7.5 max. #6 #5 #4 0.1 #1 bottom view 1.8 0.1 pin connection # 1: Vcontrol # 2: e/d # 3: ground # 4: output 1 # 5: output 2 # 6: VCC pad layout in mm Order Information O frequency type stability at 25 °C in ppm Oscillator 12.0 ~ 800.0 MHz JVE75B B = ± 50 ppm C = ± 25 ppm Example: O 155.520-JVE75B-B-3.3-15-T1 supply voltage 3.3 = 3.3 V pulling range in ppm option 15 = ± 150 ppm blank = -10 °C ~ + 70 °C T1 = -40 °C ~ + 85 °C (Suffix LF = RoHS compliant / Pb free pins or pads) Jauch Quartz GmbH • e-mail: [email protected] full data can be found under: www.jauch.de / www.jauch.fr / www.jauchusa.com All specifications are subject to change without notice 260209 Oscillator · PECL · VCXO · JVE75B 0.4±0.05 ø 13 2.0 ø 80 ø 180 9.25±0.1 7.9 max. 17.5 120° 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Taping Specification ø 21 ø 1.5±0.1 8.0±0.2 2.3±0.1 5.5 max. 500 pcs per reel in mm Direction of feed Marking Packing Note type / frequency / date code – – standard packing units are 500 pieces per reel non-multiple packing units are only supplied taped / bulk Reflow Soldering Profile temperature (°C) 260 200 10 s max. date code: A ~ M: Jan.- Dec. 9: 2009 0: 2010 1: 2011 Jan. A Febr. B Mar. C Apr. D May E June F July G Aug. H Sept. J Oct. K Nov. L Dec. M 260 °C max. 220 ±5 °C 180 ±5 °C 150 100 60 ~180 s 60 s max. 50 time (s) note: parts are also suitable for soldering systems with lead (Pb) content Jauch Quartz GmbH • e-mail: [email protected] full data can be found under: www.jauch.de / www.jauch.fr / www.jauchusa.com All specifications are subject to change without notice