JOHANSON 5515LP15A730

"High Frequency Ceramic Solutions"
5.5 GHz Low Pass Filter
P/N 5515LP15A730
Detail Specification: 12/21/2009
Page 1 of 2
General Specifications
Part Number
5515LP15A730
Impedance
50 Ω
Frequency (MHz)
5150 - 5875
Operating Temperature
-40 to +85°C
Insertion Loss
0.6 dB max.
Return Loss
10.9 dB min.
Attenuation (min.)
25 dB @ 2 x fo
Attenuation (min.)
25 dB @ 3 x fo Ref
Input Power
1 Watt max.
Mechanical Dimensions
In
0.079
2.00
± 0.004
L
1.25
W 0.049 ± 0.004
0.85
T 0.033 ± 0.004
0.30
a 0.012 ± 0.004
0.20
b 0.008 ± 0.004
c 0.012 +.004/-.008 0.30
0.35
g 0.014 ± 0.004
0.65
p 0.026 ± 0.002
Terminal Configuration
No.
Function
1
mm
± 0.10
W
± 0.10
a
± 0.10
2
NC
3
GND
4
OUT
5
GND
6
NC
7
GND
8
IN
c
L
± 0.10
3
a
± 0.10
GND
2
1
p
8
4
+0.1/-0.2
T
± 0.10
g
± 0.05
5
b
6
7
Mounting Considerations
Mount these devices with brown mark facing up.
* Line width should be designed to provide 50 ohm impedance, depending on PCB material and thickness
Units: mm
0.15
0.35
0.15
0.65
Land
0.35
1.0
*
*
1.6
1.0
0.15
0.6
Solderb Resist
No pattern Solder Resist
0.225
0.5
1.3
T
Through-hole (φ 0.30)
0.22
all units in mm
Johanson Technology, Inc. reserves the right to make design changes without notice.
All sales are subject to Johanson Technology, Inc. terms and conditions.
www.johansontechnology.com
4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821
2009 Johanson Technology, Inc. All Rights Reserved
"High Frequency Ceramic Solutions"
5.5 GHz Low Pass Filter
P/N 5515LP15A730
Detail Specification: 12/21/2009
Page 2 of 2
Typical Electrical Performance (T=25°C)
)
)
)
)
)
)
)
)
)
)
)
Insertion/Return Loss
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
Johanson Technology, Inc. reserves the right to make design changes without notice.
All sales are subject to Johanson Technology, Inc. terms and conditions.
www.johansontechnology.com
4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821
2009 Johanson Technology, Inc. All Rights Reserved