56.8mm (2.3 INCH) 16 SEGMENT SINGLE DIGIT ALPHANUMERIC DISPLAY Part Number: PSA23-11EWA Features HIGH EFFICIENCY RED Description 2.3 INCH CHARACTER HEIGHT. The High Efficiency Red source color devices are LOW CURRENT OPERATION. made with Gallium Arsenide Phosphide on Gallium HIGH CONTRAST AND LIGHT OUTPUT. Phosphide Orange Light Emitting Diode. EASY MOUNTING ON P.C. BOARDS OR SOCKETS. MECHANICALLY RUGGED. STANDARD : GRAY FACE, WHITE SEGMENT. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAD2410 REV NO: V.7 DATE:NOV/03/2006 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN:H.Q.YUAN ERP: 1311000078 Selection Guide Dice Part No. PSA23-11EWA Iv (ucd) [1] @ 10mA Lens Type HIGH EFFICIENCY RED (GaAsP/GaP) WHITE DIFFUSED Min. Typ. 1900 8000 Description Common Anode, Rt. Hand Decimal. Note: 1. Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength High Efficiency Red 627 nm IF=20mA λD[1] Dominant Wavelength High Efficiency Red 625 nm IF=20mA Δλ1/2 Spectral Line Half-width High Efficiency Red 45 nm IF=20mA Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz High Efficiency Red 4.0 3.8 2.0 C A1,A2,D1,D2,P,K VF[2] Forward Voltage B,C,E,F,G,H,J,L,M,N DP A1,A2,D1,D2,P,K IR Reverse Current B,C,E,F,G,H,J,L,M,N High Efficiency Red DP 5.0 5.0 2.5 V 10 20 10 uA IF=20mA VR = 10V VR = 10V VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter A1,A2,D1,D2,P,K Power dissipation B,C,E,F,G,H,J,L,M,N DP A1,A2,D1,D2,P,K DC Forward Current B,C,E,F,G,H,J,L,M,N DP A1,A2,D1,D2,P,K Peak Forward Current [1] B,C,E,F,G,H,J,L,M,N DP A1,A2,D1,D2,P,K Reverse Voltage B,C,E,F,G,H,J,L,M,N DP Operating / Storage Temperature High Efficiency Red Units 150 300 105 mW 30 60 30 mA 160 320 160 mA 10 10 5 V -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD2410 REV NO: V.7 DATE:NOV/03/2006 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN:H.Q.YUAN ERP: 1311000078 High Efficiency Red PSA23-11EWA SPEC NO: DSAD2410 REV NO: V.7 DATE:NOV/03/2006 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN:H.Q.YUAN ERP: 1311000078 PACKING & LABEL SPECIFICATIONS PSA23-11EWA SPEC NO: DSAD2410 REV NO: V.7 DATE:NOV/03/2006 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Joe Lee DRAWN:H.Q.YUAN ERP: 1311000078