PN2222 NPN Silicon Transistor Descriptions PIN Connection • General purpose application • Switching application C Features B C B E • Low Leakage current • Low collector saturation voltage enabling low voltage operation • Complementary pair with PN2907 E TO-92 Ordering Information Type NO. Marking PN2222 Package Code PN2222 TO-92 Absolute maximum ratings Ta=25°C Characteristic Symbol Ratings Unit Collector-Base voltage VCBO 60 V Collector-Emitter voltage VCEO 30 V Emitter-base voltage VEBO 5 V Collector current IC 600 mA Collector dissipation PC 625 mW Junction temperature Tj 150 °C Tstg -55~150 °C Storage temperature range Electrical Characteristics Characteristic Ta=25°C Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=10μA, IE=0 60 - - V Collector-Emitter breakdown voltage BVCEO IC=10mA, IB=0 30 - - V Emitter-Base breakdown voltage BVEBO IE=10μA, IC=0 5 - - V Collector cut-off current ICBO VCB=60V, IE=0 - - 20 nA DC current gain hFE VCE=10V, IC=10mA 100 - - - - - 0.4 V 250 - - MHz VCB=10V, IE=0, f=1MHz - - 8 pF VCC=30Vdc, VBE(off)=0.5Vdc, IC=150mAdc, IB1=15mAdc - - 10 ns - - 25 ns - - 225 ns - - 60 ns Collector-Emitter saturation voltage Transition frequency Collector output capacitance VCE(sat) fT Cob Delay time td Rise time tr Storage time ts Fall Time tf IC=150mA, IB=15mA VCE=20V, IC=20mA, f=100MHz VCC=30Vdc,IC=150mAdc, IB1=IB2=15mAdc KSD-T0A003-000 1 PN2222 Electrical Characteristic Curves Fig. 1 PC-Ta Fig. 3 VCE(sat)-IC Fig. 2 hFE-IC Fig. 4 Cob-VCB KSD-T0A003-000 2 PN2222 Outline Dimension KSD-T0A003-000 3 PN2222 The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0A003-000 4