SF10S600D2 Ultrafast Recovery Diode ULTRAFAST RECOVERY POWER RECTIFIER Description The SF10S600D2 power rectifier is designed for use in 4 switching power supplies, inverters, and as freewheeling diode. 1 Feature 3 Pin 1, 3: Anode 123 Low forward voltage drop and leakage current 2, 4 Pin 2, 4: Cathode Ultra fast reverse recovery time D2-PAK Low power loss and High efficiency Full lead (Pb)-free and RoHS compliant device Product Characteristics IF(AV) 10A VRRM 600V VFM @ Tj=125℃ 1.68V trr 35ns Applications Switching mode power supply Free-wheeling diode for motor application Polarity protection Power switching circuits Ordering Information Device Marking Code Package Packaging SF10S600D2 SF10S600D2 D2-PAK Tape & Reel Marking Information AUK = Manufacture Logo ∆ = Control Code of Manufacture AUK ΔYMDD SF10S600D2 YMDD = Date Code Marking -. Y = Year Code -. M = Monthly Code -. DD = Daily Code SF10S600D2 = Specific Device Code KSD-D6S005-002 1 SF10S600D2 Absolute Maximum Ratings (Limiting Values) Characteristic Symbol Value Unit Maximum repetitive reverse voltage Maximum working peak reverse voltage Maximum DC blocking voltage VRRM VRWM VR 600 V Maximum average forward rectified current IF(AV) 10 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load per diode IFSM 100 A Storage temperature range Tstg -45℃ to +150℃ ℃ Maximum operating junction temperature TJ 150 ℃ Symbol Value Unit Rth(j-c) 3.0 ℃/W Thermal Characteristics Characteristic Maximum thermal resistance junction to case Electrical Characteristics Characteristic Symbol Test Condition Peak forward voltage drop VFM (1) IFM = 10A Reverse leakage current IRM (1) VR = VRRM Min. Typ. Max. Unit Tj=25℃ - - 1.90 V Tj=125℃ - - 1.68 V Tj=25℃ - - 20 uA Tj=125℃ - - 200 uA Reverse recovery time trr IF = 1A, di/dt =-100 A/us - - 35 ns Junction capacitance Cj VR = 4VDC, f=1MHz - - 250 pF Note : (1) Pulse test : tP≤380 ㎲, Duty cycle≤2% KSD-D6S005-002 2 SF10S600D2 Rating and Characteristic Curves Fig. 2) Typical Reverse Characteristics ㎂ Fig. 1) Typical Forward Characteristics Fig. 3) Maximum Forward Derative Curve Fig. 4) Forward Power Dissipation Fig. 5) Maximum Non-Repetitive Peak Forward Surge Current Fig. 6) Typical Junction Capacitance KSD-D6S005-002 3 SF10S600D2 Package Outline Dimension ※ Recommend PCB solder land (Unit: mm) KSD-D6S005-002 4 SF10S600D2 The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-D6S005-002 5