SF5A600HD Ultrafast Recovery Rectifier ULTRA FAST RECOVERY POWER RECTIFIER Features High voltage and high reliability Ultrafast reverse recovery time High speed switching Low power loss and High efficiency Pin Configuration Pin 1, 3: Anode Pin 2, 4: Cathode Halogen-free component and RoHS compliant device TO-252 TO-252 Applications General purpose Switching mode power supply Product Characteristics Free-wheeling diode for motor application IF(AV) 5A Power switching circuits VRRM 600V VFM @ Tj=125℃ 1.75V trr 30ns DC-DC converter systems Description The SF5A600HD is ideally as boost diode in discontinuous or critical mode power factor corrections. The device is also intended for use as a freewheeling diode in power supplies and other power switching applications. Ordering Information Device Marking Code Package Packaging SF5A600HD SF5A600HD TO-252 Tape & Reel Marking Information SF5A600HD YWW SF5A600HD = Specific Device Code YWW = Year & Week Code Marking -. Y = Year Code -. WW = Week Code KSD-D6O010-002 1 SF5A600HD Absolute Maximum Ratings (Limiting Values) Characteristic Symbol Value Unit Maximum repetitive reverse voltage Maximum working peak reverse voltage Maximum DC blocking voltage VRRM VRWM VR 600 V Maximum average forward rectified current IF(AV) 5 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load per diode IFSM 60 A Storage temperature range Tstg -45℃ to +150℃ ℃ Maximum operating junction temperature TJ 150 ℃ Thermal Characteristics Characteristic Maximum thermal resistance Symbol Value Unit Rth(j-c) 6.0 ℃/W junction to case Electrical Characteristics Characteristic Peak forward voltage drop Reverse leakage current Symbol VFM (1) IRM (1) Test Condition Min. Typ. Max. Unit Tj=25℃ - - 1.90 V Tj=125℃ - - 1.75 V Tj=25℃ - - 10 uA Tj=125℃ - - 200 uA IFM = 5A VR = VRRM Reverse recovery time trr IF = 1A, di/dt =-100 A/us - - 30 ns Junction capacitance Cj VR = 10VDC, f=1MHz - - 50 pF Note : (1) Pulse test : tP≤380 ㎲, Duty cycle≤2% KSD-D6O010-002 2 SF5A600HD Rating & Electrical Characteristic Curves Fig. 2) Typical Reverse Characteristics [㎂] Fig. 1) Typical Forward Characteristics Fig. 3) Maximum Forward Derative Curve Fig. 4) Forward Power Dissipation Fig. 5) Maximum Non-Repetitive Peak Forward Surge Current Fig. 6) Typical Junction Capacitance KSD-D6O010-002 3 SF5A600HD Package Outline Dimension ※ Recommended Land Pattern (Unit: mm) 2.50 7.00 7.00 1.50 4.60 KSD-D6O010-002 4 SF5A600HD The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-D6O010-002 5