SMNY2Z30 Advanced N-Ch Power MOSFET SWITCHING REGULATOR APPLICATION Features High voltage: BVDDS=300V (Min.) Low gate charge: Qg=2.9nC (Typ.) Low drain-source On resistance: RDS(on)=8Ω (Max.) Built-in protection zener diode RoHS compliant device Ordering Information GDS Part Number Marking Package SMNY2Z30 SMNY2Z30 TO-92 TO-92 Marking Information SMNY 2Z30 YWW Column 1, 2: Device Code Column 3: Production Information e.g.) YWW -. YWW: Date Code (year, week) Absolute maximum ratings (Ta=25C unless otherwise noted) Characteristic Symbol Rating Unit Drain-source voltage VDSS 300 V Gate-source voltage VGSS 30 V Ta=25C 0.2 A Ta=100C 0.12 A IDM 1 A IAS 1.3 A EAS 182.6 mJ Repetitive avalanche current (Note 1) IAR 0.2 A Repetitive avalanche energy (Note 1) EAR 1.5 mJ Power dissipation PD 0.6 W Junction temperature TJ 150 C Storage temperature range Tstg -55~150 C Drain current (DC) * ID Drain current (Pulsed) * Avalanche current (Note 2) Single pulsed avalanche energy (Note 2) * Limited only maximum junction temperature Rev. date: 08-JUN-11 KSD-T0A075-000 www.auk.co.kr 1 of 8 SMNY2Z30 Thermal Characteristics Characteristic Thermal resistance, junction to ambient Symbol Rating Unit Rth(j-a) Max. 200 C/W Electrical Characteristics (Ta=25C unless otherwise noted) Characteristic Symbol Test Condition Min. Typ. Max. Unit Drain-source breakdown voltage BVDSS ID=250uA, VGS=0 300 - - V Gate threshold voltage VGS(th) ID=250uA, VDS=VGS 1.5 2 2.5 V Drain-source cut-off current IDSS VDS=300V, VGS=0V - - 1 uA Gate leakage current IGSS VDS=0V, VGS=10V - - 10 nA RDS(ON) VGS=10V, ID=100mA - 6 8 Forward transfer conductance (Note 3) gfs VDS=10V, ID=100mA - 0.4 - S Input capacitance Ciss - 101 130 - 15 20 Drain-source on-resistance VDS=25V, VGS=0V, f=1MHz Output capacitance Coss Reverse transfer capacitance Crss - 3.2 5 Turn-on delay time (Note 3,4) td(on) - 5 - - 17 - - 21 - tf - 35 - Qg - 2.9 4.5 - 0.4 - - 0.7 - Rise time (Note 3,4) tr Turn-off delay time (Note 3,4) Fall time (Note 3,4) Total gate charge (Note 3,4) td(off) Gate-source charge (Note 3,4) Qgs Gate-drain charge (Note 3,4) Qgd VDD=150V, ID=0.2A RG=25Ω VDS=240V, VGS=10V ID=0.2A pF ns nC Source-Drain Diode Ratings and Characteristics (Ta=25C unless otherwise noted) Characteristic Symbol Test Condition Source current (DC) IS Source current (Pulsed) ISM Integral reverse diode in the MOSFET Forward voltage VSD VGS=0V, IS=8A Reverse recovery time (Note 3,4) trr Reverse recovery charge (Note 3,4) Qrr IS=0.2A, VGS=0V dIF/dt=100A/us Min. Typ. Max. Unit - - 0.2 A - - 1 A - - 1.4 V - 270 - ns - 0.27 - uC Gate to Source Zener Diode Characteristic (Ta=25C unless otherwise noted) Characteristic Gate-Source breakdown voltage Symbol Min. Typ. Max. Unit IG=1mA, VDS=0V 20 24 - V Note: 1. Repeated rating: Pulse width limited by safe operating area 2. L=8.9mH, IAS=8A, VDD=50V, RG=25, Starting TJ=25C 3. Pulse test: Pulse width≤300us, Duty cycle≤2% 4. Essentially independent of operating temperature typical characteristics Rev. date: 08-JUN-11 KSD-T0A075-000 www.auk.co.kr 2 of 8 SMNY2Z30 Electrical Characteristic Curves Fig. 1 ID - VDS Fig. 2 ID – VGS 9 8 7 6 5 4 3 - Fig. 3 RDS(ON) - ID Fig. 4 IS - VSD Fig. 5 Capacitance - VDS Fig. 6 VGS - QG ℃ = Rev. date: 08-JUN-11 KSD-T0A075-000 www.auk.co.kr 3 of 8 SMNY2Z30 Electrical Characteristic Curves (Continue) Fig. 7 BVDSS - TJ Fig. 8 RDS(ON) - TJ C Fig. 9 ID - TC C Fig. 10 Safe Operating Area * Rev. date: 08-JUN-11 KSD-T0A075-000 www.auk.co.kr 4 of 8 SMNY2Z30 Fig. 11 Gate Charge Test Circuit & Waveform Fig. 12 Resistive Switching Test Circuit & Waveform Fig. 13 EAS Test Circuit & Waveform Rev. date: 08-JUN-11 KSD-T0A075-000 www.auk.co.kr 5 of 8 SMNY2Z30 Fig. 14 Diode Reverse Recovery Time Test Circuit & Waveform Rev. date: 08-JUN-11 KSD-T0A075-000 www.auk.co.kr 6 of 8 SMNY2Z30 Package Outline Dimensions Rev. date: 08-JUN-11 KSD-T0A075-000 www.auk.co.kr 7 of 8 SMNY2Z30 The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. Rev. date: 08-JUN-11 KSD-T0A075-000 www.auk.co.kr 8 of 8