STB1132 PNP Silicon Transistor Description PIN • Medium power amplifier Features • PC(Collector power dissipation) =1W(Ceramic substate of 250 ㎟×0.8t used) • Low collector saturation voltage : VCE(sat)=-0.2V(Typ.) • Complementary pair with STD1664 SOT-89 Ordering Information Type NO. Marking Package Code A1 YWW STB1132 SOT-89 HW1: DEVICE CODE, YWW(Y : Year code, WW : Weekly code) Absolute maximum ratings (Ta=25°C) Characteristic Symbol Ratings Unit Collector-Base voltage VCBO -40 V Collector-Emitter voltage VCEO -32 V Emitter-Base voltage VEBO -5 V IC -1 A PC 0.5 Collector current Collector power dissipation * W PC 1 Junction temperature TJ 150 °C Storage temperature Tstg -55~150 °C * : When mounted on ceramic substrate(250 ㎟×0.8t) Electrical Characteristics Characteristic (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=-50 ㎂, IE=0 -40 - - V Collector-Emitter breakdown voltage BVCEO IC=-1 ㎃, IB=0 -32 - - V Emitter-Base breakdown voltage BVEBO IE=-50 ㎂, IC=0 -5 - - V Collector cut-off current ICBO VCB=-20V, IE=0 - - -0.1 Collector cut-off current ICES VCE=-30V, IC=0 - - -0.1 ㎂ ㎂ Emitter cut-off current IEBO VEB=-4V, IC=0 - - -0.1 ㎂ DC current gain hFE 100 - 320 - - -0.2 -0.8 V - 150 - ㎒ - 20 30 ㎊ Collector-Emitter saturation voltage Transition frequency Collector output capacitance * VCE(sat) VCE=-3V, IC=-0.1A IC=-500 ㎃, IB=-50 ㎃ VCE=-5V, IC=-50 ㎃, fT f=30 ㎒ Cob VCB=-10V, IE=0, f=1 ㎒ * : hFE rank / O : 100 ~ 200, Y : 160 ~ 320 KSD-T5B021-001 1 STB1132 Electrical Characteristic Curves Fig. 1 PC - Ta ㎃ ㎽ Fig. 2 IC - VBE Fig. 4 hFE - IC Fig. 3 IC - VCE ㎃ ㎂ ㎂ ㎂ ㎂ ㎂ ㎂ ㎂ ㎂ ㎂ ㎃ Fig. 5 VCE(sat) - IC Fig. 6 Safe Operating Area * * * * ) × × ㎃ KSD-T5B021-001 2 STB1132 Outline Dimension(mm) ※Recommend PCB solder land [Unit: mm] KSD-T5B021-001 3 STB1132 The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T5B021-001 4