STC401 NPN Silicon Transistor Features PIN Connection Low saturation switching application Voltage regulator application Low saturation : VCE(SAT)=0.4V Max. High Voltage : VCEO=60V Min. C B B C E • • • • E TO-92 Ordering Information Type NO. Marking STC401 STC401 Package Code TO-92 Absolute maximum ratings Characteristic Symbol Ratings Unit Collector-Base voltage VCBO 80 V Collector-Emitter voltage VCEO 60 V Emitter-base voltage VEBO 5 V Collector current IC 1 A Collector dissipation PC 500 mW Junction temperature Tj 150 °C Storage temperature Tstg -55~150 °C Electrical Characteristics Characteristic Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=100 ㎂, IE=0 80 - - V Collector-Emitter breakdown voltage BVCEO IC=1mA, IB=0 60 - - V Emitter-Base breakdown voltage BVEBO IE=10mA, IC=0 5 - - V Collector cut-off current ICBO VCB=60V, IE=0 - - 0.1 μA Emitter cut-off current IEBO VEB=5V, IC=0 - - 0.1 μA DC current gain hFE * 200 - 400 80 - - VCE=2V, IC=100mA VCE=2V, IC=1A - Base-Emitter on voltage VBE(ON) VCE=2V, IC=500mA - - 1.2 V Collector-Emitter saturation voltage VCE(sat) IC=500mA, IB=50mA - - 0.4 V VCB=10V, IE=0, f=1MHz - 10 - pF VCB=10V, IC=50mA - 160 - MHz Collector output capacitance Transition frequency Cob fT * hFE rank : 200~400 Only KSD-T0A027-001 1 STC401 Electrical Characteristic Curves Fig. 2 VCE - IC ㎽ Fig. 1 PC - Ta Fig. 3 hFE-IC Fig. 4 Cob - VCB Fig. 5 IC - VCE Fig. 6 IC - VCE KSD-T0A027-001 2 STC401 Electrical Characteristic Curves Fig. 7 fT - IC KSD-T0A027-001 3 STC401 Outline Dimension KSD-T0A027-001 4 STC401 The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0A027-001 5