STC411 NPN Silicon Transistor Description PIN Connection • General purpose amplifier C • High voltage application B Features C B E • Low saturation switching application • Voltage regulator application • Low saturation : VCE(SAT)=0.4V Max. • High Voltage : VCEO=60V Min. E TO-92 Ordering Information Type NO. Marking STC411 STC411 Package Code TO-92 Absolute maximum ratings Characteristic Symbol Ratings Unit Collector-Base voltage VCBO 80 V Collector-Emitter voltage VCEO 60 V Emitter-base voltage VEBO 5 V IC 1 A(DC) ICP* 2 A(Pulse) Collector dissipation PC 500 mW Junction temperature Tj 150 °C Storage temperature Tstg -55~150 °C Collector current * : Single pulse, tp= 300 ㎲ Electrical Characteristics Characteristic Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=100 ㎂, IE=0 80 - - V Collector-Emitter breakdown voltage BVCEO IC=1mA, IB=0 60 - - V Emitter-Base breakdown voltage BVEBO IE=10mA, IC=0 5 - - V Collector cut-off current ICBO VCB=60V, IE=0 - - 0.1 μA Emitter cut-off current IEBO VEB=5V, IC=0 - - 0.1 μA DC current gain hFE * 200 - 400 80 - - VCE=2V, IC=100mA VCE=2V, IC=1A - Base-Emitter on voltage VBE(ON) VCE=2V, IC=500mA - - 1.2 V Collector-Emitter saturation voltage VCE(sat) IC=500mA, IB=50mA - - 0.4 V VCB=10V, IE=0, f=1MHz - 10 - pF VCB=10V, IC=50mA - 160 - MHz Collector output capacitance Transition frequency Cob fT * hFE rank : 200~400 Only KSD-T0A032-000 1 STC411 Electrical Characteristic Curves Fig. 2 VCE - IC Fig. 3 hFE-IC Fig. 4 hFE-IC Fig. 5 hFE-IC Fig. 6 hFE-IC ㎽ Fig. 1 PC - Ta KSD-T0A032-000 2 STC411 Electrical Characteristic Curves Fig. 7 Cob - VCB Fig. 8 IC - VCE Fig. 9 fT - IC Fig. 10 Safe operating Area * * * * ) KSD-T0A032-000 3 STC411 Outline Dimension KSD-T0A032-000 4 STC411 The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0A032-000 5