STN2907SF PNP Silicon Transistor Descriptions PIN Connection • General purpose application • Switching application 3 Features 1 • Large collector current • Low collector saturation voltage • Complementary pair with STN2222SF 2 SOT-23F Ordering Information Type NO. STN2907SF Marking Package Code GA □ SOT-23F ① ② ①Device Code ② Year&Week Code Absolute maximum ratings (Ta=25°C) Characteristic Symbol Ratings Unit Collector-Base voltage VCBO -60 V Collector-Emitter voltage VCEO -40 V Emitter-Base voltage VEBO -5 V Collector current IC -600 mA Collector dissipation PC* 350 mW Junction temperature Tj 150 °C Storage temperature Tstg -55~150 °C * : Package mounted on 99.5% Alumina 10×8×0.1mm. Electrical Characteristics Characteristic (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=-10μA, IE=0 -60 - - V Collector-Emitter breakdown voltage BVCEO IC=-10mA, IB=0 -40 - - V Emitter-Base breakdown voltage BVEBO IE=-10μA, IC=0 -5 - - V Collector cut-off current ICBO VCB=-60V, IE=0 - - -10 nA DC current gain hFE VCE=-10V, IC=-10mA 75 - - - - - -0.4 V 250 - - MHz - 6.0 - pF Collector-Emitter saturation voltage Transistor frequency Collector output capacitance VCE(sat) fT IC=-150mA, IB=-15mA VCE=-20V, IC=-20mA Cob VCB=-10V, IE=0, f=1MHz KSD-T5C093-000 1 STN2907SF Electrical Characteristic Curves Fig. 1 PC - Ta Fig. 3 I C - VCE Fig. 2 IC - VBE Fig. 4 VCE(sat) - IC Fig. 5 hFE - IC Fig. 6 hFE - KSD-T5C093-000 IC 2 STN2907SF Outline Dimension ※Recommend PCB solder land [Unit: mm] KSD-T5C093-000 3 STN2907SF The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T5C093-000 4