STS5343 NPN Silicon Transistor Description PIN Connection • General small signal amplifier C Features B C B E • Low collector saturation voltage : VCE(sat)=0.25V(Max.) • Low output capacitance : Cob=2pF(Typ.) • Complementary pair with STS1980 E TO-92 Ordering Information Type NO. Marking STS5343 STS5343 Package Code TO-92 Absolute maximum ratings (Ta=25°C) Characteristic Symbol Ratings Unit Collector-Base voltage VCBO 60 V Collector-Emitter voltage VCEO 50 V Emitter-Base voltage VEBO 5 V Collector current IC 150 mA Collector dissipation PC 625 mW Junction temperature Tj 150 °C Storage temperature Tstg -55~150 °C Electrical Characteristics Characteristic (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=100μA, IE=0 60 - - V Collector-Emitter breakdown voltage BVCEO IC=1mA, IB=0 50 - - V Emitter-Base breakdown voltage BVEBO IE=10μA, IC=0 5 - - V Collector cut-off current ICBO VCB=60V, IE=0 - - 0.1 μA Emitter cut-off current IEBO VEB=5V, IC=0 - - 0.1 μA DC current gain hFE VCE=6V, IC=2mA 120 - 240 - - - 0.25 V 80 - - MHz Collector-Emitter saturation voltage Transistion frequency VCE(sat) fT IC=100mA, IB=10mA VCE=10V, IC=1mA Collector output capacitance Cob VCB=10V, IE=0, f=1MHz - 2 3.5 pF Noise figure NF VCE=6V, IC=0.1mA, f=1KHz, Rg=10KΩ - - 10 dB KSD-T0A046-000 1 STS5343 Electrical Characteristic Curves Fig. 2 IC -VBE Fig. 1 PC –Ta Fig. 3 IC -VCE Fig. 4 hFE -IC ㅋㅋㅋㅋㅋ Fig. 5 VCE(sat) -IC KSD-T0A046-000 2 STS5343 Outline Dimension KSD-T0A046-000 3 STS5343 The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0A046-000 4