L U M IN I S Direct/indirect twin pole mount 1 Standard white on both faces 2 3 4 18” 5 6 7 Optional SO15P-UP Indirect light only Example: SO15P10-UP-M100 8 9 SO15P8 (8ft) SO15P10 (10ft) SO15P12 (12ft) Standard 10 10º inclination SOLIS SO15P Specification All exposed cast aluminum components are made of non corrosive pure aluminum copper free (Aluminum is less than .1% copper content.#356 alloy.) Finish: All polyester powder baked coatings preceded with a 5 baths preparation process. Meets military grade MIL-C781706 with a 2000 hours salt spray test. - Pulse rated medium base porcelain socket. - 75W/600V thermoplastic compact fluorescent socket. - One-piece molded silicone gasket with memory retention. - High power factor CWA ballast. - All stainless steel hardware. - All Moving and removable parts are sealed with a memory retention silicone gasket. 1- 36” dia. x 1/4” thick aluminum disc reflector. Reflector is standard textured white on both faces. Optional non reflective face painted same color as the luminaire suffix -RD 2 - Reinforcing stabilizer bars. 3 - 1” dia.solid aluminum twin rods reflector support. 4 - Cast aluminum sealed top cover , with clear tempered flush mount lens. 5 - 8” dia. cast aluminum housing. 6 - Cast aluminum sealed removable glass lens frame, with perimeter memory retention embedded silicone gasket. 7 - Tempered clear glass lens with minute prisms for light uniformity. 8 - Semi-specular aluminum reflector. 9 - 2” x 2” extruded square aluminum twin bollard stands. 10 - One piece heavy cast aluminum triangular bollard base. 11 - Aluminum flush mount sealed access cover plate with socket flat head stainless steel screws. 12 - Set of four 3/4” -10 x 18” lg. galvanized anchor bolts. SO15P 50% up light 50% down light .Example : SO15P10-M100 11 24” 12 13” 36” 2” power feed hole 8” Photometry 5” 6” 90 3-7/8” Separate updated technical specification sheets with related models and light sources with I.E.S formatted photometry are available on www.luminis.com. 60 Certification UL. Wet Location. Model# Mounting Set of four 3/4”-10 x 18” lg. galvanized anchor bolts. Light source selection MH (ED17) SO15P8 SO15P10 SO15P12 30 M50 M70 M100 M150 M175 MH (G12) T6 M39T M70T M150T HPS (ED17) H50 H70 H100 H150 Voltage For options details and specifications, please refer to pages 72 &128 Finish 120 V Standard factory (Refer to color chart) prewired Standard selection (If no voltage is specified) WHT:Snow white For other voltages, please specify with catalog number. BKT: Jet black BZT: Bronze H.I.D. GRT: Titanium gray 208 V DGT: Gun metal 240 V CHT: Champagne 277 V MST: Matte silver 347 V GNT: Forest green Optional colors Note: 50W.HPS is available with CS: Custom color 120/277V only. RAL: RAL# color Options UP:: Accessories Alternate top face disc color same as luminaire. Up light only. FS: Electrical Fuse RD:: (Lamps by others) luminaires may be altered for design improvements or discontinued without prior notice. LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999 Page 107 Web: www.luminis.com Sept. 2006 Rev.#2 Feb.2008