Cree® PLCC4 1 in 1 SMD LED CLA1A-WKW/MKW Data Sheet SMD LEDs is packaged in the industry standard package. These LEDs have high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under illumination application conditions. Its wide viewing angle makes these LEDs ideally suited for channel letter, or general backlighting and illumination applications. The flat top emitting surface makes it easy for these LEDs to mate with light pipes. FEATURES • Size (mm): 3.2 x 2.8 • RoHS Compliant •Color Temperatures (K): APPLICATIONS CLA1A-WKW: Cool White : Min.(4600) / Typical (5500) CLA1A-MKW: Warm White: Min. (2500) / Typical (3200) • Light Strip •CRI Typical CRI for Cool White is 72 Typical CRI for Warm White is 80 • Channel Letter •Viewing Angle: 120 degree •Luminous Intensity (mcd): Cool White (1800 - 4500) Warm White (1400 - 3550) 1 D-CT1075.00 Data Sheet: CL • Lead-Free Subject to change without notice. www.cree.com/ledlamps 1 Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit IF 35 mA IFP 100 mA Reverse Voltage VR 5 V Power Dissipation PD 147 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C Junction/Ambient RTHJA 350 °C/W Junction/Solder Point RTHJS 200 °C/W Forward Current Peak Forward Current Note Note: Pulse width ≤0.1 msec, duty cycle ≤1/10. Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Color Symbol Condition Forward Voltage Cool/Warm VF IF = 30 mA V Reverse Current Cool/Warm IR VR = 5 V μA Luminous Flux Luminous Intensity Minimum Maximum 3.6 4.2 10 Cool ΦV IF = 30 mA mlm 7000 ΦV IF = 30 mA mlm 6000 Cool IV IF = 30 mA mcd 1800 Warm IV IF = 30 mA mcd 1400 x IF = 30 mA 0.3325 y IF = 30 mA 0.3411 x IF = 30 mA 0.4234 y IF = 30 mA 2θ½ IF = 30 mA Cool Warm Cool/Warm CLD-CT1075.001 2600 2000 0.3990 deg Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree LED are registered trademarks of Cree, Inc. 2 Typical Warm Chromaticity Coordinates 50% Power Angle Unit 120 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Intensity Bin Limit (IF = 30 mA) Cool White Warm White Bin Code Min.(mcd) Max.(mcd) Bin Code Min.(mcd) Max.(mcd) Xa 1800 2240 Wb 1400 1800 Xb 2240 2800 Xa 1800 2240 Ya 2800 3550 Xb 2240 2800 Yb 3550 4500 Ya 2800 3550 Tolerance of measurement of luminous intensity is ±10%. VF Bin Limit (IF = 30 mA) Cool White Warm White Bin Code Min.(V) Max.(V) Bin Code Min.(V) Max.(V) 27 2.8 3.0 27 2.8 3.0 28 3.0 3.2 28 3.0 3.2 29 3.2 3.4 29 3.2 3.4 2a 3.4 3.6 2a 3.4 3.6 2b 3.6 3.8 2b 3.6 3.8 2c 3.8 4.0 2c 3.8 4.0 2d 4.0 4.2 2d 4.0 4.2 Tolerance of measurement of VF is ±0.05V. Color Bin Limit (IF = 30 mA) Cool White Bin Code Subbin Wa Wb W1 Wc Wd x y 0.2545 0.2633 Bin Code Subbin 0.2670 0.2830 0.3050 0.2860 0.2950 0.3210 0.2998 0.3028 0.2480 0.2640 0.2410 0.2735 0.2545 0.2245 0.2450 0.2633 Wj 0.2808 0.2740 0.2290 0.2720 0.2575 0.2895 0.2905 0.2410 0.2720 0.2575 0.2895 0.2905 0.2808 0.2740 0.2998 0.3028 0.2880 0.2620 0.3045 0.2865 0.2800 0.2480 0.2960 0.2760 0.2950 0.3210 0.3070 0.3370 0.3100 0.3150 0.3028 0.2720 0.2340 0.2640 0.2200 0.2545 0.2245 0.2545 0.2480 0.2640 0.2670 0.2720 0.2575 Wf W2 Wg 0.2735 0.2860 0.2830 0.3050 0.2895 0.2905 Wk W3 Wm 0.2633 0.2410 0.2808 0.2740 0.2998 0.2633 0.2410 0.2808 0.2740 0.2998 0.3028 0.2720 0.2575 0.2895 0.2905 0.3100 0.3150 0.3130 0.2970 0.3045 0.2865 0.2800 0.2480 0.2720 0.2340 Wh 0.2960 0.2760 0.2880 0.2620 Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree LED are registered trademarks of Cree, Inc. 3 Subbin y y We Bin Code x x CLD-CT1075.001 Wn Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Color Bin Limit (IF = 30 mA) Cool White Bin Code Subbin Wp Wq W4 Wr Ws x y 0.3070 0.3185 0.3200 0.3270 0.3100 0.3150 0.3100 0.3150 0.3200 0.3270 0.3215 0.3075 0.3130 0.2970 0.3185 0.3485 0.3300 0.3600 0.3300 0.3390 0.3200 0.3270 0.3200 0.3270 0.3300 0.3390 0.3300 0.3180 0.3215 0.3075 Bin Code Subbin x y 0.3370 0.3300 0.3600 0.3485 0.3455 0.3725 0.3443 0.3535 0.3300 0.3390 0.3300 0.3390 0.3443 0.3535 0.3430 0.3345 0.3300 0.3180 0.3455 0.3725 0.3610 0.3850 0.3585 0.3680 0.3443 0.3535 0.3443 0.3535 0.3585 0.3680 0.3560 0.3510 0.3430 0.3345 Wt Wu W5 Wv Ww Tolerance of measurement of the color coordinates is ±0.01. Warm White Bin Code Subbin Ma Mb M1 Mc Md x y 0.3610 0.3576 0.3751 0.3783 0.3820 Bin Code Subbin x y 0.3900 0.4030 0.3651 0.3926 0.4118 0.4021 0.4075 0.4260 0.3576 0.3651 0.3541 0.3401 0.3682 0.3491 0.3749 0.3781 0.3820 0.4075 0.3751 0.3783 0.3926 0.3915 0.4030 Bin Code Subbin x y 0.4250 0.4490 0.4530 0.3915 0.4310 0.4128 0.4572 0.4203 0.4390 0.4785 0.4625 0.3926 0.3915 0.4310 0.4128 0.3822 0.3580 0.4129 0.3726 0.3976 0.3653 0.4359 0.3782 0.4118 0.4021 0.4572 0.4203 0.4260 0.4390 0.4785 0.4625 0.4118 0.4021 0.4572 0.4203 0.4310 0.4128 0.4834 0.4279 0.4250 0.4490 0.4530 0.5080 0.4720 0.3751 0.3783 0.4118 0.4021 0.4572 0.4203 0.3682 0.3491 0.3976 0.3653 0.4359 0.3782 0.3822 0.3580 0.4129 0.3725 0.4588 0.3838 0.3926 0.3915 0.4310 0.4128 0.4834 0.4279 Me Mf M2 Mg Mh Mj Mk M3 Mm Mn Tolerance of measurement of the color coordinates is ±0.01. Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree LED are registered trademarks of Cree, Inc. 4 CLD-CT1075.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps CIE Chromaticity Diagram 0.5300 0.4700 M3 M 2 Mm Mj Mg M 0K 500 W W 3 W e W W 1 W W 0.2300 0.2300 a c W W W W g p W Ma r W W t W W Mk Mc 5 W 60 00 K 4 W 70 00 K 80 00 K W 2 0.2900 W m W j W W W W 10 00 0K 9 00 0K y 0.3500 0.1700 0.1700 Me 1 0.4100 Mf Mh Md v Mb w u Mn 2700K 2500K 3000K 3500K 4000K s q n k h f d b 0.2900 0.3500 0.4100 0.4700 0.5300 x Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree LED are registered trademarks of Cree, Inc. 5 CLD-CT1075.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Order Code Table* Color Kit Number Viewing Angle Luminous Intensity (mcd) Min. Max. Color Bin Code Cool White CLA1A-WKW-CXaYb153 120 1800 4500 W1,W2,W3,W4,W5 Cool White CLA1A-WKW-CXaYb453 120 1800 4500 W4,W5 Cool White CLA1A-WKW-CXbYb453 120 2240 4500 W4,W5 Color Kit Number Viewing Angle Luminous Intensity (mcd) Min. Max. Color Bin Code Warm White CLA1A-MKW-CWbYa133 120 1400 3550 M1,M2,M3 Warm White CLA1A-MKW-CWbYa513 120 1400 3550 W5,M1 Warm White CLA1A-MKW-CWbYa233 120 1400 3550 M2,M3 Warm White CLA1A-MKW-CXaYa233 120 1800 3550 M2,M3 Warm White CLA1A-MKW-CXaYa513 120 1800 3550 W5,M1 Notes: 1. The above kit numbers represent order codes which include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color bin codes will not be orderable. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree LED are registered trademarks of Cree, Inc. 6 CLD-CT1075.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs The above data are collected from statistical figures which do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree LED are registered trademarks of Cree, Inc. 7 CLD-CT1075.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Mechanical Dimensions All dimensions are in mm. Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree LED are registered trademarks of Cree, Inc. 8 CLD-CT1075.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree LED are registered trademarks of Cree, Inc. 9 CLD-CT1075.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Packaging • • • • • The boxes are not water resistant and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 2000 pcs per reel. 防潮珠。不可食 Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree LED are registered trademarks of Cree, Inc. 10 CLD-CT1075.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps