Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3205172512 Item: DIP05-1A72-12DHR DIP05-1A66-12DHR Conditions Coil Data at 20 °C Coil resistance Coil voltage Rated power Coil current Thermal resistance Inductance Pull-In voltage Drop-Out voltage = Min Typ Max Unit Typ Max Unit operating temperature + self heating ! Conditions Contact data 66/3 Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage ( > 20 AT ) Operate time incl. bounce Release time Capacity Special Product Data Number of contacts Contact - form Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Capacity Coil/Contact Case colour Housing material Connection pins Magnetic Shield Reach / RoHS conformity Approval Approval Remark Min " #$ %&" &$" $' ( not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ) * + ,& Start Value - . $/ + &/ RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch 0 1 * * 2 Conditions Min Typ Max Unit 1 A - NO according to IEC 255-5 40°C, 95% R.H. @ 10 kHz 1 0 2 black mineral filled epoxy FeNi-alloy tinned no yes UL File No. NRNT2.E156887 UL File No. NRNT8.E156887 High coil resistance Modifications in the sense of technical progress are reserved Designed at: 26.04.04 Designed by: SCHELLHORN Approval at: Last Change at: 26.04.04 Last Change by: SCHELLHORN Approval at: 21.08.09 Approval by: Approval by: KOLBRICH Version: V1.0 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3205172512 Item: DIP05-1A72-12DHR DIP05-1A66-12DHR Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability Conditions Min 5 5 wave soldering max. 5 sec. Max ! Unit 3 3 4 4 4 fully sealed Conditions General data Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Min Total weigth Packaging Typ Max Tube per 25 piece Unit 3 Modifications in the sense of technical progress are reserved Designed at: 26.04.04 Designed by: SCHELLHORN Approval at: Last Change at: 26.04.04 Last Change by: SCHELLHORN Approval at: 21.08.09 Approval by: Approval by: KOLBRICH Version: V1.0