MEDER DIP12-1A72-12M

Europe: +49 / 7731 8399 0
| Email: [email protected]
Item No.:
USA:
+1 / 508 295 0771
| Email: [email protected]
Asia:
+852 / 2955 1682
| Email: [email protected]
3212172212
Item:
DIP12-1A72-12M
Conditions
Coil Data at 20 °C
Coil resistance
Coil voltage
Rated power
Coil current
Thermal resistance
Inductance
Pull-In voltage
Drop-Out voltage
=
Contact rating
Switching voltage
Switching current
Carry current
Contact resistance static
Contact resistance dynamic
Insulation resistance
Breakdown voltage
Operate time incl. bounce
Release time
Capacity
Special Product Data
Dielectric Strength Coil/Contact
Insulation resistance Coil/Contact
Capacity Coil/Contact
Housing material
Connection pins
Magnetic Shield
Reach / RoHS conformity
Environmental data
Typ
Max
Unit
Min
Typ
Max
Unit
operating temperature + self heating
Conditions
Contact data 66/3
Min
! "# #! !$ %
not to exceed their individual max.'s
DC or Peak AC
DC or Peak AC
DC or Peak AC
' ( ) *#
Start Value
' #
,
Start Value
&
+ !, ) #,
&
( $
#
#!
&
RH <45 %, 100 V test voltage
according to IEC 255-5
measured with 40% overdrive
measured with no coil excitation
@ 10 kHz across open switch
&
.
&
(
(
/
0
Conditions
Min
according to IEC 255-5
RH <45%, 200 VDC measuring voltage
@ 10 kHz
Typ
Max
&
&
Unit
1
2
/
epoxy resin
CuFe2P, tin plated
yes
yes
Conditions
Min
Typ
Max
Unit
Modifications in the sense of technical progress are reserved
Designed at:
20.04.04
Designed by:
SCHELLHORN
Approval at:
21.08.09
Approval by:
KOLBRICH
Last Change at:
03.05.11
Last Change by:
THAUKE
Approval at:
03.05.11
Approval by:
JHEYDER
Version:
3
Europe: +49 / 7731 8399 0
| Email: [email protected]
Item No.:
USA:
+1 / 508 295 0771
| Email: [email protected]
Asia:
+852 / 2955 1682
| Email: [email protected]
3212172212
Item:
DIP12-1A72-12M
Environmental data
Shock
Vibration
Operating temperature
Storage temperature
Soldering temperature
Washability
Conditions
Min
Max
&
5
50&
wave soldering max. 5 sec.
.
&
6
Unit
3
3
4
4
4
fully sealed
Conditions
General data
Typ
1/2 sine, duration 11ms, in 3 axis
from 10 - 2000 Hz
Min
Total weigth
Packaging
Typ
Max
0
25 pcs per tube
Unit
3
Modifications in the sense of technical progress are reserved
Designed at:
20.04.04
Designed by:
SCHELLHORN
Approval at:
21.08.09
Approval by:
KOLBRICH
Last Change at:
03.05.11
Last Change by:
THAUKE
Approval at:
03.05.11
Approval by:
JHEYDER
Version:
3