Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8512183002 Item: HE12-1A83-02 Coil Data at 20 °C Conditions Min Typ Max Unit Conditions Min Typ Max Unit Coil resistance Coil voltage Rated power Inductance Pull-In voltage Drop-Out voltage Contact data 83 Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacitance Special Product Data Number of contacts Contact - form Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Case colour Housing material Sealing compound Connection pins not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ! "#$!% & Start Value ' (!$%$ (! RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch ) * + + Conditions Min Typ " " ,- Max Unit 1 A - NO according to IEC 255-5 RH <45%, 200 VDC test voltage * ) gray Polycarbonat Polyurethan Copper alloy tin plated Modifications in the sense of technical progress are reserved Designed at: 10.02.03 Designed by: BUNKE Approval at: Last Change at: 18.02.10 Last Change by: WKOVACS Approval at: 27.01.11 Approval by: Approval by: CRUF Version: 02 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8512183002 Item: HE12-1A83-02 Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability Conditions Min Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Unit . . / / / 0 0 wave soldering max. 5 sec. Max fully sealed Modifications in the sense of technical progress are reserved Designed at: 10.02.03 Designed by: BUNKE Approval at: Last Change at: 18.02.10 Last Change by: WKOVACS Approval at: 27.01.11 Approval by: Approval by: CRUF Version: 02