Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8524216000 Item: HE24-2A16 Preliminary Datasheet Conditions Coil Data at 20 °C Coil resistance Coil voltage Rated power Coil current Thermal resistance Inductance Pull-In voltage Drop-Out voltage = Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacity Special Product Data Number of contacts Contact - form Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Capacity Coil/Contact Case colour Housing material Sealing compound Connection pins Magnetic Shield Reach / RoHS conformity Typ Max Unit Min Typ Max Unit operating temperature + self heating Conditions Contact data 16 Min ! "# $%! %#! #& ' not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ( ) * +% Start value , #- * %- RH <45 %, 100 V test Voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch . / ) ) 0 Conditions Min Typ Max Unit 2 A - NO according to IEC 255-5 RH <45%, 200 VDC test voltage @ 10 kHz 1 / . 0 Polycarbonat Polyurethan Copper alloy tin plated yes Modifications in the sense of technical progress are reserved Designed at: 29.06.09 Designed by: WKOVACS Approval at: Last Change at: 02.12.10 Last Change by: KSTOPPEL Approval at: 29.06.09 Approval by: Approval by: KOLBRICH Version: 03 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8524216000 Item: HE24-2A16 Preliminary Datasheet Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability Conditions Min Max 5 5 wave soldering max. 5 sec. 4 1 Unit 2 2 3 3 3 fully sealed Conditions General data Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Min Total weigth Packaging Typ Max VPE Unit 2 Modifications in the sense of technical progress are reserved Designed at: 29.06.09 Designed by: WKOVACS Approval at: Last Change at: 02.12.10 Last Change by: KSTOPPEL Approval at: 29.06.09 Approval by: Approval by: KOLBRICH Version: 03