Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8624154001 Item: HF24-1A54-9 Conditions Coil Data at 20 °C Coil resistance Coil voltage Rated power Coil current Thermal resistance Inductance Pull-In voltage Drop-Out voltage = Min Typ Max Unit operating temperature + self heating ! ! " Conditions Contact data 54 Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacity Special Product Data Number of contacts Contact - form Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Dielectric Strength Coil/Shield Dielectric Strength Shield/Contact Capacitance coil to contact Case colour Housing material Connection pins Magnetic Shield Sealing compound Reach / RoHS conformity Min Typ Max Unit # $% &'# '%# %( ) not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC * + , -' Start Value " . %/ , '/ RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch 0 1 " + + 2 Max Unit " Conditions Min Typ 1 A - NO according to IEC 255-5 RH <45%, 200 VDC test voltage according to IEC 255-5 according to IEC 255-5 1 0 1 1 " " 2 nature Plastic cu-alloy, tinned yes Polyurethan yes Modifications in the sense of technical progress are reserved Designed at: 17.04.08 Designed by: WKOVACS Approval at: Last Change at: 11.09.09 Last Change by: KSCHIELENSKI Approval at: 26.01.11 Approval by: Approval by: CRUF Version: 03 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8624154001 Item: HF24-1A54-9 Special Product Data Conditions Min Remarks Typ Max Unit Coil protection - Silicone Elastomer Environmental data Operating temperature Storage temperature Soldering temperature Shock Vibration Washability Conditions Min wave soldering max. 5 sec. 1/2 sine wave duration 11ms from 10 - 2000 Hz Max Unit 3 3 3 5 5 fully sealed Conditions General data Typ 4 4 Min Total weigth Packaging Typ Max Unit 5 Styrofoam pallete ESD neutral 12pcs./each Modifications in the sense of technical progress are reserved Designed at: 17.04.08 Designed by: WKOVACS Approval at: Last Change at: 11.09.09 Last Change by: KSCHIELENSKI Approval at: 26.01.11 Approval by: Approval by: CRUF Version: 03