Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 2116632030 Item: KSK-1A66/3-2030 Magnetic properties Conditions Min Typ Pull-In excitation (Reference value) measured in coil- "define operation" Test-Coil Reed switch unmodified Contact-No. Contact-form Contact-material Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage ( > 20 AT ) Operate time incl. bounce Release time Capacity Contact dimensions Overall length Glass body length Min Shock Vibration Operating temperature Storage temperature Soldering temperature Typ Max Unit 66/3 A Iridium not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ! " # $ % " "% Start Value ! & % ' ( " & Start Value RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch ) # * +, Conditions Min Tolerance according to drawing Tolerance according to drawing Environmental data Unit KMS-01 Conditions Contact data 66/3 Max Typ Max Unit Max Unit ## # Conditions Min Typ 1/2 sine, duration 11ms, in 3 axis from 10 - 2000 Hz /# / wave soldering max. 5 sec. 0 . . . Modifications in the sense of technical progress are reserved Designed at: Last Change at: 10/27/10 Designed by: Last Change by: MAPODACA Approval at: Approval at: 10/29/10 Approval by: Approval by: TLANE Rev. No.: 01