Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 2243902034 Item: MK04-1B90C-300W Magnetic properties Pull in Test equipment Conditions Min Typ at 20°C Special Product Data Contact-form Contact rating operating voltage operating ampere Switching current Sensor-resistance Housing material Case color Sealing compound Max Unit KMS-14+PK002+SA002 Conditions Min Typ Max Unit NC/ not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC measured with 40% overdrive Environmental data Conditions Operating temperature Operating temperature Storage temperature safety class cable not moved cable moved Cable specification Conditions PBT glass fibre reinforced white Polyurethan Min Typ Max Unit Min Typ Max Unit Max Unit DIN EN 60529 Cable typ Cable material Cross section flat cable PVC 0,14 sq-mm Conditions General data Mounting advice mounting advice mounting advice tightening torque Min Typ over 5m cable, a series resistor is recommended. Magnetically conductive screws must not be used. Decreased switching distances by mounting on iron. !"# $ % Disk ISO 7089 Modifications in the sense of technical progress are reserved Designed at: 03.05.06 Designed by: MPOTUZAK Approval at: 04.10.07 Approval by: BUELTZHOEFFER Last Change at: 17.03.08 Last Change by: ALICHTENSTEIN Approval at: 25.08.08 Approval by: BUELTZHOEFFER Version: 03