Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 9116612903 Item: MK11/B10-1A66D-500W Magnetic properties Pull-In Test equipment Conditions Min at 20°C Special Product Data Contact - form Contact rating Switching voltage Carry current Switching current Sensor-resistance Housing material Sealing compound Reach / RoHS conformity Environmental data Shock Vibration Operating temperature Operating temperature Storage temperature Data to reed-contact modifica Overall length cable Typ Max Unit KMS-18 + PH 42 Conditions Min Typ Max Unit A - NO not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC measured with 40% overdrive brass Polyurethan yes Conditions Min Typ Max Unit Min Typ Max Unit Min Typ Max Unit Max Unit 1/2 sine, duration 11ms, in 3 axis from 10 - 2000 Hz cable not moved cable moved Conditions Tolerance according to drawing Cable specification Conditions Cable type Cable material Cross section single wires PVC AWG 24 Conditions General data Mounting advice Tightening torque Min Typ over 5m cable, a series resistor is recommended. ! "#$ % &! Disk ISO 7089 Modifications in the sense of technical progress are reserved Designed at: Last Change at: 27.07.11 Designed by: Last Change by: WKOVACS Approval at: Approval at: 08.08.11 Approval by: Approval by: DKUECHLER Version: 01