Europe: +49 / 7733 9487 0 | Email: [email protected] USA: +1 / 508 539 0002 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] Magnetical properties Pull in Test equipment Item No.: 9133902304 Item: MK13-1B90C-3000W Conditions Min Typ at 20°C Special Product Data Contact - form Contact rating operating voltage operating ampere Switching current Sensor-resistance Housing material Case color Sealing compound Max Unit KMS-14+PK002+SA002 Conditions Min Typ Max Unit NC/ not to exceed their individual max.'s DC or Peak AC DC or Peak AC measured with 40% overdrive Environmental data Conditions Operating temperature Operating temperature Storage temperature Cable not moved cable moved Cable specification Conditions PBT glass fibre reinforced white Polyurethan Min Typ Max Unit Min Typ Max Unit Max Unit Cable typ Cable material Cross section [mm²] flat cable PVC,white 0,14 Conditions General data Mounting advice Mounting advice Mounting advice tightening torque Min Typ from 5m cable, a pre-resistor is recommended. Decreased switching distances by mounting on iron. Magnetically conductive screws must not be used. ! " #$% & '" Disk ISO 7089 Modifications in the sense of technical progress are reserved Designed at: 16.05.07 Designed by: WKOVACS Approval at: 16.05.07 Approval by: TFRITSCHI Last Change at: 17.10.07 Last Change by: ALICHTENSTEIN Approval at: 07.11.07 Approval by: BUELTZHOEFFER Version: 02