Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 9133903054 Item: MK13-1C90C-500W Magnetic properties Pull in Test equipment Pull-In in milliTesla Conditions Min Typ at 20°C Max Unit KMS-14+PK002+SA002 phys. caused tolerance +/- 0,1mT Drop-Out in milliTesla phys. caused tolerance +/- 0,1mT Special Product Data Contact - form Contact rating operating voltage operating ampere Switching current Sensor-resistance Housing material Case color Sealing compound Conditions Min Typ Max Unit Form C not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC measured with 40% overdrive ! PBT glass fibre reinforced white Polyurethan Environmental data Conditions Operating temperature Operating temperature Storage temperature cable not moved cable moved Cable specification Conditions Min Typ Max Unit " " " Min Cable typ Cable material Cross section Typ Max Unit Max Unit round cable PVC 0,14 sq-mm Conditions General data Mounting advice Mounting advice Mounting advice tightening torque Min Typ from 5m cable, a pre-resistor is recommended. Decreased switching distances by mounting on iron. Magnetically conductive screws must not be used. # $%& ' Disk ISO 7089 Modifications in the sense of technical progress are reserved Designed at: 08.01.07 Designed by: ALICHTENSTEIN Approval at: 11.05.07 Approval by: HWEDELE Last Change at: 04.03.09 Last Change by: ALICHTENSTEIN Approval at: 04.03.09 Approval by: TFRITSCHI Version: 04