Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8212290000 Item: MRE12-2C90 Coil Data at 20 °C Conditions Min Typ Max Unit Conditions Min Typ Max Unit Coil resistance Coil voltage Rated power Pull-In voltage Drop-Out voltage Contact data 90 Contact-form Contact-material Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time, incl. bounce Release time Capacity Special Product Data Insulation resistance Coil/Contact Insulation voltage Coil/Contact Shock Vibration Ambient temperature Storage temperature Soldering temperature Cleaning Housing material Sealing compound Connection pins C Rhodium not to exceed their individual max.'s DC or Peak AC/ with 40% overdrive DC or Peak AC/with 40% overdrive DC or Peak AC/ with 40% overdrive ! "# Start Value $ % !"! % RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch & '( Conditions Min RH <45%, 200 VDC test voltage according to IEC 255-5 1/2 sine wave duration 11ms from 10 - 2000 Hz Typ Max ) Unit & * + + , , , -. wave sodering max. 5 sec. fully sealed Polycarbonat Polyurethan Copper alloy tin plated Modifications in the sense of technical progress are reserved Designed at: Last Change at: 01.09.08 Designed by: Last Change by: MPOTUZAK Approval at: Approval at: 28.08.09 Approval by: Approval by: DSTASTNY Version: 01