Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8724121200 Item: MRX24-1C21 Conditions Coil Data at 20 °C Coil resistance Inductance Coil voltage Rated power Thermal resistance Pull-In voltage Drop-Out voltage = Special Product Data Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacitance Environmental data Insulation resistance Coil/Contact Insulation voltage Coil/Contact Shock Vibration Ambient temperature Storage temperature Soldering temperature Housing material Sealing compound Remarks Remarks Remarks Min Typ Max Unit Min Typ Max Unit operating temperature + self heating Conditions !" #$ %&" &$" $' ( ! not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ) * + ,& Start Value ! ! - $. + &. RH <45 %, 200 V test voltage / measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch * * 0 Conditions Min Typ RH <45%, 200 VDC test voltage according to IEC 255-5 1/2 sine wave duration 11ms from 10 - 2000 Hz Unit / 1 ! 2 2 3 3 3 4 4 wave soldering max. 5 sec Max Plastics / Polyamid Polyurethan Reed Relay to be used for the galvanic separation of intrinsically safe and non-intrinsical circuits with Ex-approval by PTB 01 ATEX 2050 U. Modifications in the sense of technical progress are reserved Designed at: 17.01.08 Designed by: WKOVACS Approval at: 28.01.08 Approval by: KOLBRICH Last Change at: 04.08.08 Last Change by: ALICHTENSTEIN Approval at: 10.09.08 Approval by: KOLBRICH Version: 02