PLAD30KP10 thru PLAD30KP400CA, e3 30kW Surface Mount Transient Voltage Suppressor SCOTTSDALE DIVISION APPEARANCE WWW . Microsemi .C OM DESCRIPTION These Microsemi 30 kW Transient Voltage Suppressors (TVSs) are designed for applications requiring protection of voltagesensitive electronic devices that may be damaged by harsh or severe voltage transients including lightning per IEC61000-4-5 and class levels with various source impedances described herein. This series is available in 10 to 400 volt Standoff Voltages (VWM) in both unidirectional and bi-directional with either 5% or 10% tolerances of the Breakdown Voltage (VBR). Microsemi also offers numerous other TVS products to meet higher or lower power demands and special applications. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com FEATURES • • • • • • • • APPLICATIONS / BENEFITS Available in both Unidirectional and Bidirectional construction (Bidirectional with C or CA suffix) Selections for 10 to 400 volt Standoff Voltages VWM Suppresses transients up to 30 kW @ 10/1000 µs and 200 kW @ 8/20 µs (see Figure 1) Fast response Optional 100% screening for avionics grade is available by adding MA prefix to part number for added 100% temperature cycle -55oC to +125oC (10X) as well as surge (3X) and 24 hours HTRB with post test VZ & IR (in the operating direction for unidirectional or both directions for bidirectional) Options for screening in accordance with MIL-PRF-19500 for JAN, JANTX, and JANTXV are available by adding MQ, MX, or MV prefixes respectively to part numbers. Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B RoHS Compliant devices available by adding an “e3” suffix • • • • • MAXIMUM RATINGS • • • • • • MECHANICAL AND PACKAGING º Peak Pulse Power dissipation at 25 C: 30,000 watts at 10/1000 μs (also see Figures 1 and 2) Impulse repetition rate (duty factor): 0.05% tclamping (0 volts to V(BR) min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional Operating & Storage temperature: -65ºC to +150ºC Thermal resistance: 0.5ºC/W junction to case, or 50ºC/W junction to ambient when mounted on FR4 PC board with recommended mounting pad with 1 oz Cu (see last page) Steady-State Power dissipation: 250 watts at Tc = 25oC, or 2.5 watts at TA = 25ºC when mounted on FR4 PC board as described for thermal resistance above Forward Surge: 1500 Amps (theoretical) at 8.3 ms halfsine wave for unidirectional devices only Solder temperatures: 260 ºC for 10 s (maximum) Copyright © 2007 9-12-2007 Rev G • • • • • • • CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 FINISH: Tin-Lead or RoHS Compliant annealed matte-Tin plating readily solderable per MILSTD-750, method 2026 MARKING: Body marked with part number POLARITY: For unidirectional devices, the cathode is on the metal backside (package bottom) WEIGHT: 1.7-2.0 grams (approximate) TAPE & REEL option: Standard per EIA-296 for axial package (add “TR” suffix to part number) See package dimension on last page Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 PLAD30KP10 thru 400CA, e3 • • Protection from switching transients and induced RF Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: Class 1,2,3,4: PLAD30KP10 - PLAD30KP400A or CA Class 5: PLAD30KP10 - PLAD30KP400A or CA (short distance) Class 5: PLAD30KP10 - PLAD30KP220A or CA (long distance) Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: Class 1,2, 3: PLAD30KP10 to PLAD30KP400A or CA Class 4: PLAD30KP10 to PLAD30KP220A or CA Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance: Class 2: PLAD30KP10 to PLAD30KP400A or CA Class 3: PLAD30KP10 to PLAD30KP220A or CA Class 4: PLAD30KP10 to PLAD30KP110A or CA PLAD30KP10 thru PLAD30KP400CA, e3 30kW Surface Mount Transient Voltage Suppressor SCOTTSDALE DIVISION MICROSEMI PART NUMBER (Note 2) Copyright © 2007 9-12-2007 Rev G VOLTS 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 28 28 30 30 33 33 36 36 40 40 43 43 45 45 48 48 51 51 54 54 58 58 60 60 64 64 MAXIMUM CLAMPING VOLTAGE VC @ IPP BREAKDOWN VOLTAGE V(BR) @ V(BR) VOLTS 12.8– 14.6 12.8– 14.0 13.0 – 15.5 13.0 – 14.5 13.3 – 16.3 13.3 – 14.7 14.4 – 17.6 14.4 – 15.9 15.6 – 19.1 15.6 – 17.2 16.7 – 20.4 16.7 – 18.5 17.8 – 21.8 17.8 – 19.7 18.9 – 23.1 18.9 – 20.9 20.0 – 24.4 20.0 – 22.1 22.2 – 27.1 22.2 – 24.5 24.4 – 29.8 24.4 – 26.9 26.7 – 32.6 26.7 – 29.5 28.9 – 35.3 28.9 – 31.9 31.1 – 38.0 31.1 – 34.4 33.3 – 40.7 33.3 – 36.8 36.7 – 44.9 36.7 – 40.6 40.0 – 48.9 40.0 – 44.2 44.4 – 54.3 44.4 – 49.1 47.8 – 58.4 47.8 – 52.8 50.0 – 61.1 50.0 – 55.3 53.3 – 65.1 53.3 – 58.9 56.7 – 69.3 56.7 – 62.7 60.0 – 73.3 60.0 – 66.3 64.4 – 78.7 64.4 – 71.2 66.7 – 81.5 66.7 – 73.7 71.1 – 86.9 71.1 – 78.6 I(BR) mA 150 150 150 150 150 150 150 150 150 150 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 MAXIMUM STANDBY CURRENT ID @ VWM MAXIMUM PEAK PULSE CURRENT IPP (FIG. 3) MAXIMUM TEMPERATURE COEFFICIENT OF V(BR) αV(BR) VOLTS 19.2 18.4 22.4 19.2 22.8 20.6 24.6 22.4 26.6 24.0 28.6 25.8 30.0 27.2 31.8 28.8 33.8 30.8 37.6 34.0 40.2 36.4 44.0 39.8 47.6 43.0 51.6 46.4 53.8 48.8 59.0 53.3 64.3 58.1 71.4 64.5 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103.0 93.6 107.0 96.8 114.0 103.0 μA 15,000 15,000 15,000 15,000 15,000 15,000 6000 6000 3000 3000 750 750 450 450 150 150 120 60 45 45 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 A 1560 1629 1490 1560 1317 1455 1221 1341 1134 1251 1350 1164 999 1101 942 1041 885 975 798 882 747 822 681 753 630 696 582 645 564 618 510 564 468 516 420 468 390 432 372 414 348 390 330 366 312 342 294 318 282 312 264 294 Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 mV/ ºC 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 10 10 12 12 13 12 15 14 17 16 19 18 22 20 24 22 27 24 29 26 36 30 37 35 40 38 48 44 53 50 54 51 60 54 65 58 68 64 75 70 80 72 85 75 Page 2 PLAD30KP10 thru 400CA, e3 PLAD30KP10 PLAD30KP10A PLAD30KP11 PLAD30P11A PLAD30KP12 PLAD30KP12A PLAD30KP13 PLAD30KP13A PLAD30KP14 PLAD30KP14A PLAD30KP15 PLAD30KP15A PLAD30KP16 PLAD30KP16A PLAD30KP17 PLAD30KP17A PLAD30KP18 PLAD30KP18A PLAD30KP20 PLAD30KP20A PLAD30KP22 PLAD30KP22A PLAD30KP24 PLAD30KP24A PLAD30KP26 PLAD30KP26A PLAD30KP28 PLAD30KP28A PLAD30KP30 PLAD30KP30A PLAD30KP33 PLAD30KP33A PLAD30KP36 PLAD30KP36A PLAD30KP40 PLAD30KP40A PLAD30KP43 PLAD30KP43A PLAD30KP45 PLAD30KP45A PLAD30KP48 PLAD30KP48A PLAD30KP51 PLAD30KP51A PLAD30KP54 PLAD30KP54A PLAD30KP58 PLAD30KP58A PLAD30KP60 PLAD30KP60A PLAD30KP64 PLAD30KP64A REVERSE STAND-OFF VOLTAGE VWM (Note 1) WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS PLAD30KP10 thru PLAD30KP400CA, e3 30kW Surface Mount Transient Voltage Suppressor SCOTTSDALE DIVISION PLAD30KP70 PLAD30KP70A PLAD30KP75 PLAD30KP75A PLAD30KP78 PLAD30KP78A PLAD30KP85 PLAD30KP85A PLAD30KP90 PLAD30KP90A PLAD30KP100 PLAD30KP100A PLAD30KP110 PLAD30KP110A PLAD30KP120 PLAD30KP120A PLAD30KP130 PLAD30KP130A PLAD30KP150 PLAD30KP150A PLAD30KP160 PLAD30KP160A PLAD30KP170 PLAD30KP170A PLAD30KP180 PLAD30KP180A PLAD30KP200 PLAD30KP200A PLAD30KP220 PLAD30KP220A PLAD30KP250 PLAD30KP260A PLAD30KP280A PLAD30KP300A PLAD30KP350A PLAD30KP400A VOLTS 70 70 75 75 78 78 85 85 90 90 100 100 110 110 120 120 130 130 150 150 160 160 170 170 180 180 200 200 220 220 250 260 280 300 350 400 MAXIMUM CLAMPING VOLTAGE VC @ IPP BREAKDOWN VOLTAGE V(BR) @ V(BR) VOLTS 77.8 – 95.1 77.8 – 86.0 83.3 – 102.0 83.3 – 92.1 86.7 – 106.0 86.7 – 95.8 94.4 – 115.0 94.4 – 104.0 100 – 122 100 – 111 111 – 136 111 – 123 122 – 149 122 – 135 133 – 163 133 – 147 144 – 176 144 – 159 167 – 204 167 – 185 178 – 218 178 – 197 189 – 231 189 – 209 200 – 244 200 – 221 222 – 271 222 – 245 245 – 299 245 – 271 278 – 308 289 – 320 311 – 345 333 – 369 389 – 431 444 - 492 I(BR) mA 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 MAXIMUM STANDBY CURRENT ID @ VWM MAXIMUM PEAK PULSE CURRENT IPP (FIG. 3) MAXIMUM TEMPERATURE COEFFICIENT OF V(BR) αV(BR) VOLTS μA 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 125 113 134 121 139 126 151 137 160 146 179 162 196 177 214 193 231 209 268 243 287 259 304 275 321 291 356 322 293 356 403 419 451 483 564 644 A 240 264 222 246 216 240 198 216 186 204 168 186 156 168 140 156 130 142 112 124 104 116 98 110 94 104 84 94 76 84 74 71 66 62 53 46 mV/ ºC 93 84 100 90 104 95 115 104 120 109 134 122 147 132 161 145 174 157 202 183 216 195 229 207 242 219 269 243 297 269 306 318 344 368 430 490 Symbol VWM PPP V(BR) ID Copyright © 2007 9-12-2007 Rev G Definition SYMBOLS & DEFINITIONS Symbol Working Peak (Standoff) Voltage Peak Pulse Power Breakdown Voltage Standby Current IPP VC I(BR) Definition Peak Pulse Current Clamping Voltage Breakdown Current for V(BR) Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3 PLAD30KP10 thru 400CA, e3 NOTE 1: Transient Voltage Suppressors are normally selected with reverse “Stand Off Voltage” VWM which should be equal to or greater than the dc or continuous peak operating voltage level. NOTE 2: For bidirectional construction, indicate a C or CA suffix after the part number. WWW . Microsemi .C OM MICROSEMI PART NUMBER (Note 2) REVERSE STANDOFF VOLTAGE VWM (Note 1) PLAD30KP10 thru PLAD30KP400CA, e3 30kW Surface Mount Transient Voltage Suppressor SCOTTSDALE DIVISION WWW . Microsemi .C OM PPP – Peak Pulse Power - kW GRAPHS TP – Pulse Time - sec FIGURE 2 Pulse Wave Form Peak Pulse Power (PPP) or continuous Power in Percent of FIGURE 1 Peak Pulse Power vs. Pulse Time PLAD30KP10 thru 400CA, e3 TL Lead Temperature oC FIGURE 3 Derating Curve Copyright © 2007 9-12-2007 Rev G Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 4 PLAD30KP10 thru PLAD30KP400CA, e3 30kW Surface Mount Transient Voltage Suppressor SCOTTSDALE DIVISION WWW . Microsemi .C OM PACKAGE AND MOUNTING PAD DIMENSIONS Inches [mm] PLAD30KP10 thru 400CA, e3 Copyright © 2007 9-12-2007 Rev G Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 5