RJ-45 10/100 BASE-TX Jack with Magnetic Module N51XX Series • Single port shielded RJ-45 connector with 10/100 Magnetics • Operating temperature: 0°C to 70°C • Storage temperature: -40°C to 85°C • Available for all 10/100 transceiver Phy chips • Complies with IEEE standards and all 10/100 Ethernet specifications including 350μH with 8mA DC Bias • 1500Vrms Isolation ELECTRICAL SPECIFICATION @ 25°C Part Number Insertion Loss Return Loss (dB max.) (dB min.) Common to Common Mode Rejection (dB min.) Common to Diferential Mode Rejection (dB min.) Crosstalk (dB min.) 0.3-100 MHz 1-30 MHz 30-60 MHz 60-80 MHz 0.1-100 MHz 0.1-100 MHz 0.5-100 MHz -1 -1 -1 -18 -18 -18 18-20Log(f/30MHz) 18-20Log(f/30MHz) 18-20Log(f/30MHz) -12 -12 -12 -35 -35 -35 -40 -40 -40 -35 -35 -35 N5110 N5120 N5130 • Note: 1) Contact: 30 micro inch selective gold plating 4)Operating Life: 750 cycles min. 2) Plastic Housing: Glass filled polyester UL94V-0 5) PCB retention pre-solder: 1 Lb min. 3) Pins: Phosphor bronze t=0.35mm 6) PCB retention post- solder: 10 Lbs min. • Other versions available with alternate pin-out configurations. Contact MPS Engineering Team. Mechanical 0.75 [19.05] 0.050 [1.27] 0.62 [15.75] Ø0.035 [Ø0.89] 0.85 [21.59] 0.100 [2.54] 0.025 [0.63] 0.100 [2.54] Pin 1 0.53 [13.59] 0.01 [0.25] Pin 1 0.250 [6.35] 0.60 [15.19] 8 0.18 [4.57] 0.100 [2.54] 0.425 [10.79] 0.450 [11.43] Ø0.062 [Ø1.57] Ø0.128 [Ø3.25] 0.050 [1.27] 0.61 [15.49] Suggested Pad Layout Dimensions Unless otherwise specified, all tolerances are: .XX ± 0.010” & .XXX ± 0.003” Inches [mm] N3XXXS-A 0443TA Product performance is limited to specified parameter. Data is subject to change without prior notice. 2463 208th, Ste. 205 Torrance, CA 90501 0.120 [3.05] Phone: (310)533-1455 Fax: (310)533-1853 1 http://www.mpsind.com Email: [email protected] RJ-45 10/100 BASE-TX Jack with Magnetic Module Schematics: N5110 TD+ 3 TD- N5120 RJ45 1CT:1CT RD+ 6 1 TX+ RD- 4 TCT 6 1CT:1CT 1CT:1CT RD+ 3 1 TX- 1 RJ45 RCT 2 2 TX+ 6 RX+ RD+ 7 2 1CT:1CT 3 RX+ 4 RCT 5 4 5 5 3 RX- RD- 4 6 RX7 8 RD- 8 7 TCT 2 TX- 8 8 75 x4 75 x8 1000pF, 2kV 1000pF, 2kV SHIELD N5130 RJ45 TD+ 1 TD- 1CT:1CT 1 TX+ 2 TX- 2 RD+ 3 1CT:1CT 3 RX+ 4 RCT 4 5 6 RX- RD- 6 7 TCT 7 8 8 75 x4 1000pF, 2kV SHIELD Product performance is limited to specified parameter. Data is subject to change without prior notice. 2463 208th, Ste. 205 Torrance, CA 90501 Phone: (310)533-1455 Fax: (310)533-1853 2 http://www.mpsind.com Email: [email protected]