Home Phone Networking Analog Magnetics Module with 10 Base-T ELECTRONICS INC. EPB5174G • Supports TUT Systems HPN Architecture • • UL/IEC 950 Approved File #132261 • • Meets UL 1950 Spplementary Insulation Requirements • • Meets or exceeds IEEE802.3 Requirements • • Robust construction allows for reflow processes • • Temperature Range 0°C to 70°C • Electrical Parameters @ 25° C HPNA 10 Base-T Insertion Loss (dB Max.) Return Loss (dB Min.) Isolation (Vrms) Insertion Loss (dB Max.) Return Loss (dB Min.) 1-27 MHz 1-12 MHz --- --- -18 2000 5-10 MHz -1 5-10 MHz -1 -20 1500 Isolation (Vrms) • Characteristic Impedance : 100 Ω • HPNA 10-Base-T Schematic 1 2CT:1:1 4 14 Cable Side 3 Chip Side 12 7 6 16 2 13 Chip Side 5 2CT:1 15 1:1 Cable Side 9 11 8 10 Package A Dimensions N J Pin 1 I.D. Dim. PCA EPB5174G Date Code B Pad Layout Q D P M E C K L H I F G PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 A B C D E F G H I J K L M N P Q Min. .980 .370 .215 --.010 --.490 .016 .008 --0° .025 --------- (Inches) Max. Nom. 1.00 .390 .235 --.015 --.510 .022 .012 --8° .045 --------- .990 .380 .225 .700 .013 .100 .500 .018 .010 .145 4° .035 .030 .100 .090 .540 CSB5174G Rev. - 7/23/01 Product performance is limited to specified parameters. Data is subject to change without prior notice. (Millimeters) Min. Max. Nom. 24.89 9.40 5.46 --.254 --12.45 .406 .203 --0° .635 --------- 25.40 9.91 5.97 --.381 --12.95 .559 .305 --8° 1.14 --------- 25.15 9.65 5.71 17.78 .330 2.54 12.70 .457 .254 3.68 4° .889 .762 2.54 2.29 13.72 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com