10Base-T Interface Module ELECTRONICS INC. EPE6166AS • Robust construction allows for toughest reflow processing • Complies with or exceeds IEEE 802.3, 10Base-T Standards • 1500 Vrms Isolation Electrical Parameters @ 25° C Common Mode Rejection (dB Min.) OCL (µH Min.) Insertion Loss (dB Max.) Return Loss (dB Min.) @ 100 KHz, 20 mVrms Receive 1-10 MHz 5-10 MHz @ 20 MHz @ 25 MHz @ 30 MHz @ 40 MHz 30-100 MHz 1-10 MHz Xmit Xmit Xmit Xmit Xmit Xmit Xmit Between Channels -1 -15 -7 -18 -30 -35 -30 -30 140 Attenuation (dB Min.) Crosstalk (dB Min.) • Cut-off Frequency : 17 MHz ± 1, Ref. @ 5 MHz • Impedance : Xmit, 52 Ω/Rcv, 100 Ω • Schematic Receive Transmit 1:1 1: 1 16 2 15 3 14 2 11 6 7 Pole LPF 10 8 9 7 Package .540 (13.72) .055 (1.40) .150 (3.81) .095 (2.41) PCA EPE6166AS Date Code .270 (6.86) .350 (8.89) .010/.015 (.254/.381) .240 (6.10) .050 (1.27) .016/.022 (.406/.559) .420 (10.67) Suggested Solder Pad Layout .030 (.762) .050 (1.27) 0°-8° .008/.012 (.203/.305) .035 (.889) .150 (3.81) .370 (9.40) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6166AS Rev. Orig1 4/3/03 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com