FEATURES - HIGH RELIABILITY FOR LOW COST - CHEAPEST AVAILABLE 5x3.2 MM CRYSTAL - CERAMIC BODY WITH GLASS SEALED CERAMIC COVER - EXCELLENT CLOCK SIGNAL GENERATUR FOR CPU'S 5 x 3.2 x 1.2 mm with 2 solder pads 12.000 MHz; 14.31818 MHz; 20.000 MHz; 24.576 MHz; STANDARD FREQUENCIES 25.000 MHz; 27.000 MHz; 30.000 MHz OTHER FREQUENCIES AVAILABLE ON REQUEST FREQUENCY RANGE AT-FUNDAMENTAL MODE OF VIBRATION 50 ~ 30 Ω max. RESONANCE RESISTANCE >+-20 ppm FREQUENCY TOLERANCE AT 25°C 0/+50°C ~ -20/+70°C WORKING TEMPERATURE RANGE +-30 ppm TEMPERATURE STABILITY 12.000 MHz = 12pF; 16pF; 20pF 14.31818 MHz = 12pF; 16pF; 20pF 20.000 MHz = 12pF 24.000 MHz = 12pF STANDARD LOAD CAPACITANCE (OTHER CL ON REQUEST AVAILABLE) 24.576 MHz = 16pF; 20pF 25.000 MHz = 12pF; 20pF 27.000 MHz = 20pF 30.000 MHz = 20pF 7 pF max. SHUNT CAPACITANCE 100 µW standard (other drive levels are available on request) DRIVE LEVEL +-5 ppm per year AGING >500 MΩ DC/100V +-10% INSULATION RESISTANCE -40/+85°C STORAGE TEMPERATURE In accordance with the RoHS guideline 2002/95/EC, glass seal contain low RoHS share of Pb. Crystal is RoHS compliant. Tape and Reel (1.000 pcs per reel) DELIVERY FORM OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION MINI-SMD-CRYSTAL SERIES SMD0503/2CC PART NUMBERING SYSTEM SMD0503/2CC 27.000 MHz 30/50/-20+70/20pF EXAMPLE TYPE SMD0503/2CC FREQUENCY IN MHZ FREQUENCY TOLERANCE AT 25°C REQUIRED VALUE TEMPERATURE STABILITY TEMPERATURE RANGE REQUIRED VALUE LOAD CAPACITANCE REQUIRED VALUE REQUIRED VALUE REV.00 /March 2009 http://www.petermann-technik.com | [email protected] OUTLINE DRAWING REEL SPECIFICATION 1. 75+0.1 - 4.0+0.1 1.5 PULL DIRECTION +0 -1 0.3+0.1 - 5.4+0.1 - 12.0+0.2 - 5.5+0.1 - 2. 0+0.1 - 1.5 3.5+0.1 - 1. 4+0.1 - +0.1 -1 8.0+0.1 - 2.0+0.5 - 60+5 - 13.0+0.2 - 180 +0 -3 21.0+0.8 - 13.0+0.3 - Unit: mm +0 16.5 -1 Specification 01 / REV. 00 March 2009 http://www.petermann-technik.com | [email protected] Page 2 / 3 REFLOW SOLDER PROFILE TEMPERATURE 260°C REF LOW 1 to 5°C/s 1TO5°C /s COOLING PREHEAT IN G 10s max 150°C 1 to 9°C/s 25°C 60 200 TIME (Seconds) Crystals can be soldered according to the norm JEDEC J-STD-020C. Specification 01 / REV. 00 March 2009 http://www.petermann-technik.com | [email protected] Page 3 / 3