Extract from the online catalog PLC-OPIT- 24DC/ 24DC/2 Order No.: 2900364 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2900364 PLC interface, consisting of PLC-BPIT basic terminal block with PushIn connection and pluggable miniature optocoupler, for assembly on DIN rail NS 35/7.5, input: 24 V DC, output: 3-33 V DC/3 A Product notes WEEE/RoHS-compliant since: 05/05/2009 Commercial data GTIN (EAN) 4 046356 508780 sales group G247 Pack 10 pcs. Customs tariff 85364190 Catalog page information Page 85 (IF-2011) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Technical data Input data Nominal input voltage UN 24 V DC Input voltage range in reference to UN 0.8 ... 1.2 Switching threshold "0" signal in reference to UN ≤ 0.4 PHOENIX CONTACT Inc., USA http://www.phoenixcon.com Page 1 / 6 Aug 24, 2011 PLC-OPIT- 24DC/ 24DC/2 Order No.: 2900364 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2900364 Switching threshold "1" signal in reference to UN ≥ 0.8 Typical input current at UN 8.5 mA Typical response time 20 µs (at UN) Typical turn-off time 300 µs (at UN) Operating voltage display Yellow LED Type of protection Protection against polarity reversal Free-wheeling diode Protective circuit/component Polarity protection diode Damping diode Transmission frequency 300 Hz Output data Output nominal voltage range 3 V DC ... 33 V DC Limiting continuous current 3 A (see derating curve) Maximum inrush current 15 A (10 ms) Voltage drop at max. limiting continuous current ≤ 200 mV Output circuit 2-wire, floating Type of protection Protection against polarity reversal Surge protection Protective circuit/component Polarity protection diode Connection data Connection method Push-In connection Stripping length 8 mm Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.14 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 14 General data Width 6.2 mm Height 80 mm Depth 94 mm Ambient temperature (operation) -25 °C ... 60 °C Ambient temperature (storage/transport) -25 °C ... 70 °C PHOENIX CONTACT Inc., USA http://www.phoenixcon.com Page 2 / 6 Aug 24, 2011 PLC-OPIT- 24DC/ 24DC/2 Order No.: 2900364 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2900364 Mounting position Any Assembly instructions In rows with zero spacing Operating mode 100% operating factor Inflammability class acc. to UL 94 V0 Pollution degree 2 Surge voltage category III Certificates / Approvals Certification CUL, CUL Listed, UL, UL Listed Accessories Item Designation Description 0801762 NS 35/ 7,5 CU UNPERF 2000MM DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m 0801733 NS 35/ 7,5 PERF 2000MM DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm 0801681 NS 35/ 7,5 UNPERF 2000MM DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m 0801377 NS 35/ 7,5 V2A UNPERF 2000MM DIN rail, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver 1201756 NS 35/15 AL UNPERF 2000MM DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm 1201895 NS 35/15 CU UNPERF 2000MM DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m 1201730 NS 35/15 PERF 2000MM DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm 1201714 NS 35/15 UNPERF 2000MM DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m 1201798 NS 35/15-2,3 UNPERF 2000MM DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m 2966841 PLC-ATP BK Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101, isolation Assembly PHOENIX CONTACT Inc., USA http://www.phoenixcon.com Page 3 / 6 Aug 24, 2011 PLC-OPIT- 24DC/ 24DC/2 Order No.: 2900364 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2900364 Bridges 2966812 FBST 6-PLC BU Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: blue 2966825 FBST 6-PLC GY Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: gray 2966236 FBST 6-PLC RD Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: red 2967688 FBST 8-PLC GY Single plug-in bridge, Length: 8 mm, Number of positions: 2, Color: gray 2966692 FBST 500-PLC BU Continuous plug-in bridge, Length: 500 mm, Color: blue 2966838 FBST 500-PLC GY Continuous plug-in bridge, Length: 500 mm, Color: gray 2966786 FBST 500-PLC RD Continuous plug-in bridge, Length: 500 mm, Color: red 2966595 OPT-24DC/ 24DC/ 2 Pluggable miniature optocouplers, power optocouplers, input: 24 V DC, output: 3-33 V DC/3 A 2900445 PLC-BPIT- 24DC/21 6.2 mm PLC basic terminal blocks with Push-In connection method, input voltage of 24 V DC (without relay or optocoupler) 2966508 PLC-ESK GY Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5 2296061 PLC-V8/D15B/OUT V8-OUTPUT adapter for eight 6.2 mm PLC interfaces (1 PDT, etc./see "Additional Products"). 15-pin D-SUB female connector, control logic: Positive switching 2296058 PLC-V8/D15S/OUT V8-OUTPUT adapter for eight 6.2 mm PLC interfaces (1 PDT, etc./see "Additional Products"). 15-pin D-SUB male connector, control logic: Positive switching 2295554 PLC-V8/FLK14/OUT V8-OUTPUT adapter for eight 6.2 mm PLC interfaces (1 PDT, etc./see "Supplementary Products"). 14-pos. flat-ribbon cable connection for the PLC system cabling, control logic: Plus switching 2304102 PLC-V8/FLK14/OUT/M V8-OUTPUT adapter for eight 6.2 mm PLC interfaces (1 PDT, etc./see "Supplementary Products"). 14-pos. flat-ribbon cable connection for the PLC system cabling, control logic: Minus switching 1051016 ZB 6,LGS:FORTL.ZAHLEN Zack marker strip, 10-section, printed horizontally: with the numbers 1 - 10, 11 - 20 and so on up to 491 - 500, color: white 1051003 ZB 6:UNBEDRUCKT Zack strip, unprinted, strips with 10 labels for individual labeling with M-PEN or CMS system, for terminal block width: 6.2 mm, color: white General Marking PHOENIX CONTACT Inc., USA http://www.phoenixcon.com Page 4 / 6 Aug 24, 2011 PLC-OPIT- 24DC/ 24DC/2 Order No.: 2900364 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2900364 Tools 1204517 SZF 1-0,6X3,5 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip Diagrams/Drawings Diagram Circuit diagram PHOENIX CONTACT Inc., USA http://www.phoenixcon.com Page 5 / 6 Aug 24, 2011 PLC-OPIT- 24DC/ 24DC/2 Order No.: 2900364 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2900364 Address PHOENIX CONTACT Inc., USA 586 Fulling Mill Road Middletown, PA 17057,USA Phone (800) 888-7388 Fax (717) 944-1625 http://www.phoenixcon.com © 2011 Phoenix Contact Technical modifications reserved; PHOENIX CONTACT Inc., USA http://www.phoenixcon.com Page 6 / 6 Aug 24, 2011