Pomona ® FEATURES: • Used to make your own attenuator, balun or filter. MATERIALS: Upper Connector: Double Banana Jack Brass per QQ-B-626, Alloy 360, ½ hard. Finish: Nickel plate per QQ-N-290 Class 2 (.0002/.0003) Insulation: Polypropylene, molded to banana jacks and banana plug bodies. Color: Blue. Marking: “POMONA ELECTRONICS, CALIF.”, “MODEL 1837” Lower Connector: Double Banana Plug Spring - Beryllium Copper per QQ-C-533, Berylco 25, Cond. H.T. Plug Body – Brass per QQ-B-626, Alloy 360, Model 1837 Double Banana Plug, Three Terminal Isolation ½ Hard. Finish: Nickel plate per QQ-N-290 Class 2 (.0002/.0003) Solder Turret Terminals: Brass per QQ-B-626, Alloy 360, ½ Hard. Finish: Bright tin plated per MIL-T-10727, Type I, (.0001/.0003). RATINGS: Operating Temperature: +55°C. (+131°F.) Max. Operating Voltage: 2500 VDC Current: 15 Amperes Contact Resistance: Less than .001 Ohms per banana plug ORDERING INFORMATION: Model 1837 All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 S:\Engineering \Release\DataSheets\FlukeDataSheet\d1837_1_01.doc PomonaACCESS 90846 (800) 444-6785 or (425) 466-6010 More drawings available at www.pomonaelectronics.com Page 1 of 1