05021 704-15K36 - 704-15K36T Only One Name Means ProTek’Tion™ HIGH POWER AIRCRAFT/ VEHCILE DC BUS VOLTAGE SUPPRESSOR Description The 704-15K36 and 704-15K36T are 15 kilowatt silicon transient voltage suppressors (TVS) designed for use primarily in 28 Volt aircraft applications in accordance with MIL-STD-704 and MIL-STD-19500. These assemblies typically operate with a minimum source impedance of 0.25 Ohms. These devices have a peak pulse power rating of 15,000 Watts for a 1 ms waveshape and therefore can be used in applications where induced lightning on rural or remote transmission lines present a hazard to electronic circuitry. The 704-15K36 is designed for high current short peak pulse transient applications, where as the 704-15K36T is designed for extended peak pulse transients greater than 1 millisecond. 704 package This series can be screened upon request for military requirements in accordance with MIL-PRF-19500 (applicable tests). 704T package Features applications • Meets MIL-STD-704 • 15 kilowatts Peak Pulse Power per Line (tp = 10/1000µs) • Each Device 100% Tested • 28 Volt Power Supply Protection • DC Power Supply Protection • MIL-STD-704 Power Bus Protection Mechanical characteristics • Molded Plastic Case • 704-15K36 Approximate Weight: 38 grams • 704-15K36T Approximate Weight: 65 grams • Flammability Rating UL 94V-0 • Military Screening Available Upon Request for IAW MIL-PRF-19500 • Standard Screening Available Upon Request: H1 - Submodule Screening (Test Plans 05231 & 05232) H2 - Submodule & Module Screening (Test Plan 05233) H3 - Submodule & Module Screening with Group B & C Lot Testing (Test Plans 05234 & 05235) A Warranty Disclaimer is required for the purchase of this part. Contact Customer Service for more information. 05021.R11 4/11 Page 1 www.protekdevices.com 05021 704-15K36 - 704-15K36T Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 10/1000) - See Figure 1 Operating Temperature SYMBOL VALUE UNITS PPP 15 kilowatts TL -55 to 150 °C TSTG -55 to 150 °C Steady State Power Dissipation @ 50°C TA 10.0 Watts Forward Surge Rating @ 25°C 1/120 seconds FI 300 Amps Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified RATED STAND-OFF VOLTAGE minimum breakdown voltage MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM LEAKAGE CURRENT VWM VOLTS @10mA V(BR) VOLTS @ I PPM VC volts @V WM ID µA IPPM amps @100A, 8.3ms VF volts dc 704-15K36 31.5 36 53 100 300 3.0 704-15K36T 31.5 36 53 500 300 15.0 PART NUMBER 05021.R11 4/11 Page 2 MAXIMUM peak pulse current (Fig. 2) MAXIMUM FORWARD VOLTAGE www.protekdevices.com 05021 704-15K36 - 704-15K36T Only One Name Means ProTek’Tion™ typical device characteristics figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - kilowatts 1,000 100 10 704-15K36T 15kW 10/1000µs Waveform 704-15K36 1 1 10 100 1,000 td - Pulse Duration - µs 10,000 100,000 figure 3 POWER DERATING CURVE figure 2 PULSE WAVEFORM 100 tf TEST WAVEFORM PARAMETERS tf = 10µs td = 1000µs 100 Peak Value IPP Peak Pulse Power 10/1000µs 80 % Of Rated Power IPP - Peak Pulse Current - % of IPP 1M td = t/(IPP/2) 50 60 40 20 e 0 0 -t 1 2 0 3 25 50 75 100 125 150 TL - Lead Temperature - °C t - Time - ms 05021.R11 4/11 0 Page 3 www.protekdevices.com 05021 704-15K36 - 704-15K36T Only One Name Means ProTek’Tion™ package information 704 outline dimensions millimeters dim inches min max min max A 49.28 51.56 1.97 2.03 B 43.92 44.96 1.73 1.77 C 2.79 3.56 0.11 0.14 D 18.29 19.81 0.72 0.78 E 3.18 DIA 0.125 DIA F 8.76 10.29 0.345 0.405 G 13.51 15.04 0.532 0.592 H 0.66 0.71 0.026 0.028 I 11.94 13.46 0.47 0.53 J 2.41 2.92 0.095 0.115 K 7.70 8.20 0.303 0.323 L 9.40 10.92 0.37 0.43 Notes 1. Dimension “E” is nominal. A C B F D G H E I K L 05021.R11 4/11 Page 4 www.protekdevices.com 05021 704-15K36 - 704-15K36T Only One Name Means ProTek’Tion™ package information 704T outline dimensions millimeters dim inches min max min max A 62.74 64.26 2.47 2.53 B 53.34 54.48 2.10 2.145 C 4.32 5.33 0.17 0.21 D 10.54 12.07 0.415 0.475 E 3.18 DIA F 8.26 G 0.125 DIA 9.27 0.325 11.43 H 21.84 I 0.45 23.37 0.86 5.59 J 16.51 K 0.365 0.92 0.22 17.53 0.65 8.51 0.69 0.335 Notes 1. Dimensions “E”, “G”, “I” and “K” are nominal. A B C F I D G H E J K ORDERING INFORMATION base PART NUMBER SUBMODULE SCREENING SUBMODULE & mODULE SCREENING SUBMODULE, MODULE, GROUP B & c LOT TESTING 704-15K36 H1 H2 H3 704-15K36T H1 H2 H2 Notes 1. Marking on Part - logo, date code, polarity dot (for positive terminal) and part number. Package outline per document number 06035.R2 9/09 05021.R11 4/11 Page 5 www.protekdevices.com 05021 704-15K36 - 704-15K36T Only One Name Means ProTek’Tion™ company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] Web www.protekdevices.com www.protekanalog.com WARRANTY DISCLAIMER ProTek warrants only that the 704-15K36 product (the “Device”) has been manufactured to meet the electrical specifications set forth in the electrical specification data sheet published by ProTek Devices. ProTek disclaims all other warranties. If the Device is applied or used in circumstances in which the electrical characteristics specified for the Device are exceeded, the Device may fail. ProTek Devices is not liable for any failures of the Device if the Device is used in circumstances that exceed the published specifications for the Device. If for any reason the Device fails, customer’s sole and exclusive remedy shall be replacement of the failed Device. Customer assumes all risks arising from incorporation of the Device in to any other product. Customer acknowledges that ProTek Devices has made the Device available to the Customer for inspection, and the Customer has had an opportunity to inspect and test the Device. COPYRIGHT © ProTek Devices 1998 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05021.R11 4/11 Page 6 www.protekdevices.com