05018 LCD05C - LCD24C Only One Name Means ProTek’Tion™ High powered multi-line tvs array Description The LCD Series are high powered multi-line TVS arrays available in a 16 pin DIP package. This series is designed to protect high-speed applications from the damaging effects of ESD, EFT and secondary transient threats. The LCD Series has a peak pulse power rating of 800 Watts for an 8/20µs waveshape. This devices meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. 16 pin dip package Features applications • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(LineGnd) & Level 3(Line-Line) • 800 Watts Peak Pulse Power per Line (tp = 8/20µs) • Bidirectional Configuration • ESD Protection > 25 kilovolts • Available in Multiple Voltages • Protects up to 8 Lines • Low Capacitance: 15pF • RoHS Compliant • REACH Compliant • Ethernet 10/100 Base T • RS-485 • xDSL & ATM • SCSI & USB Interfaces • Audio/Video I/O Ports Mechanical characteristics • Molded 16 Pin Dual-In-Line (DIP) Package • Approximate Weight: 1.2 grams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • Flammability Rating UL 94V-0 PIN CONFIGURATION 05018.R8 11/10 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 Page 1 www.protekdevices.com 05018 LCD05C - LCD24C Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature SYMBOL VALUE UNITS PPP 800 Watts TL -55 to 150 °C TSTG -55 to 150 °C ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Note 1) RATED STAND-OFF VOLTAGE minimum breakdown voltage MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM LEAKAGE CURRENT maximum CAPACITANCE VWM VOLTS @1mA V(BR) VOLTS @ IP = 1A VC volts @ 8/20µs VC @ I PP @V WM ID µA @0V, 1MHz C pF temperature coefficient of V(BR) q V(BR) mV/°C LCD05C 5.0 6.0 9.8 24.0V @ 45.0A 100 15 3 LCD08C 8.0 8.5 12.3 25.5V @ 40.0A 10 15 9 LCD12C 12.0 13.3 19.0 32.0V @ 34.0A 4 15 16 LCD15C 15.0 16.7 25.5 38.0V @ 27.0A 4 15 17 LCD24C 24.0 26.7 40.0 48.0V @ 22.0A 4 15 26 notes 1. Tested on pin pairs 1 and 16, 2 and 15, 3 and 14, 4 and 13, 5 and 12, 6 and 11, 7 and 10, 8 and 9. 05018.R8 11/10 Page 2 www.protekdevices.com 05018 LCD05C - LCD24C Only One Name Means ProTek’Tion™ typical device characteristics figure 1 peak pulse power vs pulse time PPP - Peak Pulse Current - kilowatts 100 800W, 8/20µs Waveform 10 1 0.1 0.1 10 100 td - Pulse Duration - µs Peak Value IPP 80 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs e-t 60 40 10,000 figure 3 power derating curve Peak Pulse Power 8/20µs 80 % Of Rated Power tf 100 td = t/(IPP/2) 60 40 20 20 0 1,000 figure 2 pulse wave form 120 IPP - Peak Pulse Current - % of IPP 1 0 05018.R8 11/10 5 10 15 t - Time - µs 20 25 30 Page 3 0 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 www.protekdevices.com 05018 LCD05C - LCD24C Only One Name Means ProTek’Tion™ typical device characteristics figure 4 overshoot & clamping voltage for LCd05C 24 5 Volts per Division 15 5 -5 -15 ESD Test Pulse - 12 kilovolt, 1/30ns (Waveshape) figure 4 typcial clamping voltage vs peak pulse current for LCd05C VC - Clamping Voltage - Volts 16 12 8 4 0 05018.R8 11/10 0 2 4 6 8 10 12 IPP - Peak Pulse Current - Amps Page 4 14 16 18 www.protekdevices.com 05018 LCD05C - LCD24C Only One Name Means ProTek’Tion™ SPICE MODEL figure 1 spice model I/O ABD LCRD LCRD ABD Lg 0.8nH ABD - Avalanche Breakdown Diode (TVS) LCRD: Low Capacitance Rectifier Diode Lg - Lead Inductance table 1 - spice parameters parameter PART NUMBER LCD05C 05018.R8 11/10 unit abd(tvs) LCRD BV V See Table 2 200 IBV µA 1 0.01 Cjo pF See Table 2 5 IS A See Table 2 1E-13 Vj V 0.6 0.6 M - 0.33 0.33 N - 1 1 RS Ohms See Table 2 0.31 TT s 1E-8 1E-9 EG eV 1.11 1.11 table 2 - abd specific spice parameters i s (amps) bv(volts) cjo(pF) 6.0 880 1E-11 rs(ohms) 0.09 LCD08C 8.5 481 1E-13 0.18 LCD12C 13.3 319 1E-13 0.22 LCD15C 16.7 238 1E-13 0.31 LCD24C 26.7 210 1E-13 0.93 Page 5 www.protekdevices.com 05018 LCD05C - LCD24C Only One Name Means ProTek’Tion™ application information Port 1 D+ D- Port 3 D+ D- USB Output Connector USB Output Connector 16 15 1 2 USB IC 14 13 3 4 USB Output Connector USB Output Connector 12 11 10 9 5 6 7 8 Port 2 D+ D- Port 4 D+ D- figure 1 - COMMON-MODE USB Protection Circuit connectivity is as follows: • Pins 1, 2, 3, 4, 5, 6, 7 and 8 connected to ground. • Pins 16 and 15 connected to Port 1, D- and D+. • Pins 14 and 13 connected to Port 2, D- and D+. • Pins 12 and 11 connected to Port 3, D- and D+. • Pins 10 and 9 connected to Port 4, D- and D+. circuit board recommendations Circuit board layout is critical for electromagnetic compatibility protection. The following guidelines are recommended: • The protection device should be placed near the input terminals or connectors, the device will divert the transient current immediately before it can be coupled into the nearby traces. • The path length between the TVS device and the protected line should be minimized. • All conductive loops including power and ground loops should be minimized. • The transient current return path to ground should be kept as short as possible to reduce parasitic inductance. • Ground planes should be used whenever possible. For multilayer PCBs, use ground vias. 05018.R8 11/10 Page 6 www.protekdevices.com 05018 LCD05C - LCD24C Only One Name Means ProTek’Tion™ 16 pin dip package information A outline dimensions dim millimeters inches min max min max A 18.80 19.55 0.740 0.770 B 6.35 6.85 0.250 0.270 C 7.50 7.74 0.295 0.305 D 0.21 0.38 0.008 0.015 E 0° 10° 0° 10° F 0.51 1.01 0.020 0.040 G 3.69 4.44 0.145 0.175 H 2.80 3.30 0.110 0.130 I 1.02 1.77 0.040 0.070 J 1.27 1.27 0.050 0.050 K 0.39 0.53 0.015 0.021 L 2.54 2.54 0.100 0.100 Orientation Dot (Pin #1) B I 12 Places C F G J 12 Places K 16 Places H D 16 Places E L Notes 1. Dimensions are exclusive of mold flash and metal burrs. 2. Dimensions “J” and “L” are between centers. ORDERING INFORMATION base PART NUMBER (xx = Voltage) LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty LCDxxC -LF n/a n/a n/a 25 Notes 1. Marking on Part - logo, part number, date code and pin one defined by dot on top of package. Package outline per document number 06003.R2 9/09. 05018.R8 11/10 Page 7 www.protekdevices.com 05018 LCD05C - LCD24C Only One Name Means ProTek’Tion™ company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 1998 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05018.R8 11/10 Page 8 www.protekdevices.com