95225 PA5110 Constant Current LED Driver. ANALOG PRODUCTS DIVISION The PA5110 is a white LED constant current driver used for backlighting of digital photo frames or 3 to 5-inch LED screens. Features Fast 1.2MHz Switching Frequency High Efficiency:85% Typical The minimum input voltage 2.5 V Drives 7 Series 2 Parallel LED’s with 5V VIN Drives 3 Series 5 Parallel LED’s with 5V VIN Requires Only 0.47uF Output Capacitor It switches at 1.2MHz and uses minimal external components which provide cost and real estate saving over alternate solutions. Inherently Matched LED Current The output capacitor can be as low as 0.47uF, Over-voltage protection and UVLO function Feedback voltage is 95mV. Uses Very Small Inductors SOT23-6 Package It is a step-up DC/DC converter specifically designed to drive white LED’s at a constant current. It can drive up to fifteen LED’s. Pin Configurations Applications 1 6 VCC GND 2 5 OVP 3 4 CE SW LED series and parallel applications LED Display Panels Backlighting. FB SOT23-6L Block Diagram Pin1 SW PWM CONTROL Pin5 OVP Current Sense FOSC Symbo l Description Symbo l Description SW Switching Output VCC Power Supply In GND Ground OVP Over Voltage Protection FB Feedback CE Start-Up + + Pin6 VCC Slope Comp - VREF + Pin2 GND gm - Ordering Information Pin3 FB Temperature Range Package Part Number -40 to 85°C SOT23-6L PA5110-6L - SHUTDOWN + Pin 4 CE Description 561 E Elliott Rd, Suite 175, Chandler, Arizona Tel. (480) 539-2900 Fax. (480) 632-1715 www.protekanalog.com 95225 Rev0 04/09 NOT FOR USE IN LIFE SUPPORT SYSTEMS PA5110 Constant Current LED Driver. ANALOG PRODUCTS DIVISION Absolute maximum ratings Parameter Symbol Value Unit Supply Voltage VIN 20 V Feedback Voltage FB 10 V Switch Voltage SW 32 V CE Voltage VCE 20 V Operating temperature range Topr -25 to +70 °C Storage temperature range Rstg -65 to +150 °C Tj 125 °C Junction temperature Electrical Characteristics Tamb = 25°C, VIN=5V,VCE=5V, unless otherwise specified. Parameter Test Conditions / Pins Minimum Operating Voltage Min Type 4.5 ISW=100mA, Duty Cycle=66% FB Pin Bias Current Supply Current Unit V Maximum Operating Voltage Feedback Voltage Max 20 V 86 95 104 mV 50 100 200 nA 1.9 0.1 2.5 1 mA µA 1.6 MHz VCE=0V Switching Frequency 0.8 1.2 Maximum Duty Cycle 85 90 % 320 mA ISW =250mA 350 mV VSW=5V 0.01 Switch Current Limit Switch VCESAT Switch Leakage Current CE Voltage High 1.5 0.4 CE Pin Bias Current 65 27 30 NOT FOR USE IN LIFE SUPPORT SYSTEMS V µA 33 561 E Elliott Rd, Suite 175, Chandler, Arizona Tel. (480) 539-2900 Fax. (480) 632-1715 www.protekanalog.com 95225 Rev0 04/09 uA V CE Voltage Low OVP Protection 5 V PA5110 Constant Current LED Driver. ANALOG PRODUCTS DIVISION Typical Applications L1 VCC 22µ C1 1µF 6 VCC 5 OVP 4 CE 3 FB 1 SW D4 D1 D1 D7 D7 C2 0.47µF 2 GN 6.2Ω 6.2Ω 7 Series 2 Parallel SOT23-6L L1 VCC 22µ 6 VCC C1 1µF 4 CE 5 OVP 3 FB 1 SW 2 GN D4 C2 0.47µF D1 D1 D1 D1 D1 D2 D2 D2 D2 D2 D3 D3 D3 D3 D3 6.2Ω 6.2Ω 6.2Ω 6.2Ω 6.2Ω 3 Series 5 Parallel SOT23-6L 561 E Elliott Rd, Suite 175, Chandler, Arizona Tel. (480) 539-2900 Fax. (480) 632-1715 www.protekanalog.com 95225 Rev0 04/09 NOT FOR USE IN LIFE SUPPORT SYSTEMS PA5110 Constant Current LED Driver. ANALOG PRODUCTS DIVISION L1 VCC 22µ C1 1µF 6 VCC 5 4 CE 3 FB 1 SW D4 D1 D1 D7 D7 C2 0.47µF 2 GN 5K Analog Voltage Backlight Control 90K 6.2Ω 6.2Ω VDC L1 VCC 22µ C1 1µF PWM 6 VCC 5 4 CE 3 FB 1 SW 2 GN D4 D1 D1 D7 D7 C2 0.47µF 1K Logic Voltage Backlight Control 6.2Ω 6.2Ω 561 E Elliott Rd, Suite 175, Chandler, Arizona Tel. (480) 539-2900 Fax. (480) 632-1715 www.protekanalog.com 95225 Rev0 04/09 NOT FOR USE IN LIFE SUPPORT SYSTEMS PA5110 Constant Current LED Driver. ANALOG PRODUCTS DIVISION Waveforms IQ vs Temperature 2. 2. 1. 1. IQ(mA) 1. -50 1. 10 1. 25 0. 0. 0. 0. 0. 2. 0. 4. 8. 6. 10. VIN (V) Switch Frequency vs 1. 1. Switch Frequency (MHz) 1. 0. 0. 0. 0. 0. -25 25 0. 75 50 10 Temp (°C) η vs Temperature 84. 84. 83. η (%) 83. ILED = 82. ILED = 82. ILED = 81. 81. 80. 80. -25 0. 50 25 75 10 ILED = (mA) 561 E Elliott Rd, Suite 175, Chandler, Arizona Tel. (480) 539-2900 Fax. (480) 632-1715 www.protekanalog.com 95225 Rev0 04/09 NOT FOR USE IN LIFE SUPPORT SYSTEMS PA5110 Constant Current LED Driver. ANALOG PRODUCTS DIVISION Drive 7 Series 2 Parallel LED’s 90.00% 88.00% 86.00% 84.00% 82.00% Vin=5V η (%) 80.00% Vin=12V 78.00% 76.00% 74.00% 72.00% 70.00% 0 5 10 15 20 ILED(mA) Drive 3 Series 5 Parallel 88.0% 87.0% 86.0% η (%) 85.0% 84.0% Vin = 83.0% 82.0% 81.0% 80.0% 79.0% 0 5 10 15 20 ILED (mA) 561 E Elliott Rd, Suite 175, Chandler, Arizona Tel. (480) 539-2900 Fax. (480) 632-1715 www.protekanalog.com 95225 Rev0 04/09 NOT FOR USE IN LIFE SUPPORT SYSTEMS PA5110 Constant Current LED Driver. ANALOG PRODUCTS DIVISION SOT-23-6 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SOT23-6 D 6 5 PACKAGE DIMENSIONS 4 O° ° K 1 2 DIM 3 A B C D E G J K L M J M B A G MOUNTING PAD TYPICAL 0.70 1.90 0.95 2.40 1.00 INCHES MIN MAX 2.80 1.50 0.90 0.30 0.85 0.90 0.09 2.60 0.0 0.30 0.110 0.059 0.036 0.012 0.033 0.036 0.003 0.102 0.0 0.012 3.05 1.75 1.30 0.40 1.05 1.45 0.20 3.00 0.15 0.60 0.120 0.070 0.051 0.016 0.040 0.057 0.008 0.118 0.006 0.024 NOTES 1. Dimensioning and tolerances per ANSI Y14.5M, 1985. 2. Controlling Dimension: Inches 3. Dimensions are exclusive of mold flash and metal burrs. 4 DIM Millimeters Inches 1 2 3 4 5 MILLIMETERS MAX MIN 0.028 0.074 0.037 0.094 0.039 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix -T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, 3 2 1 5 Outline & Dimensions: Rev 3 - 3/08, 06013 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P 3.20 ± 0.10 3.20 ± 0.10 1.65 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ±0.30 4.00 ±0.10 2.00 ±0.05 4.00 ±0.10 PO t D 1O Pitches Cumulative Tolerance on Tape. + O.2 P2 Top cover tape Pin 1 Indicated by Dot AO F w KO 5110 5110 5110 BO Pin1 P User Direction of Feed COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). 561 E Elliott Rd, Suite 175, Chandler, Arizona Tel. (480) 539-2900 Fax. (480) 632-1715 www.protekanalog.com 95225 Rev0 04/09 NOT FOR USE IN LIFE SUPPORT SYSTEMS tmax 0.25