05327 PDLC05 Only One Name Means ProTek’Tion™ ultra low capacitance tvs array Description The PDLC05 is an ultra low capacitance (typically 0.8p), transient voltage suppressor array. This device provides circuit protection for high-speed data transmission interfaces in wired and wireless computing and networking applications. The PDLC05 has a working voltage of 5V and offers protection in a SOT-23 package. This device meets the requirements of IEC 61000-4-2 (ESD), IEC 61000-4-4 (EFT) and IEC 61000-4-5 (Surge). The PDLC05 offers a ultra low capacitance protection solution for circuits operating at high frequencies and faster edge rates, where insertion loss and signal integrity are serious concerns. sot-23 package Features applications • Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV • Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns • Compatible with IEC 61000-4-5 (Surge): 12A, 8/20µs - Level 1(LineGround) & Level 2(Line-Line) • Low Clamping Voltage • Ultra Low Capacitance: 1pF (Typical) • RoHS Compliant • REACH Compliant • High-Speed Data Transmission Interfaces • Cellular Phones • MP3 Players • Portable Electronics • Wireless Bus Protection mechanICal characteristics • Molded JEDEC SOT-23 Package • Approximate Weight: 8 milligrams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • Flammability Rating UL 94V-0 • 8mm Tape and Reel per EIA Standard 481 PIN CONFIGURATION 1 3 2 05327.R0 9/10 Page 1 www.protekdevices.com 05327 PDLC05 Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Operating Temperature Storage Temperature Peak Pulse Current - 8/20µs (See Note 1) SYMBOL VALUE UNITS TL -55 to 150 °C TSTG -55 to 150 °C IPP(Max) 15 Amps Note 1. Applies to unidirectional pins only. ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER device marking PDLC05 MINIMUM BREAKDOWN VOLTAGE VWM VOLTS 5.0 L05 MAXIMUM LEAKAGE CURRENT @ 1mA V(BR) VOLTS MAXIMUM CLAMPING VOLTAGE (Fig. 1) @ I P = 1A VC VOLTS @V WM ID µA TYPICAL junction CAPACITANCE per line @0V, 1MHz C pF 6.0 9.8 5 0.8 figure 1 pulse wave form tf 100 Peak Value IPP 80 60 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs e-t 60 40 td = t/(IPP/2) Peak Pulse Power 8/20µs 40 30 20 20 0 figure 2 power derating curve 50 % Of Rated Power 120 IPP - Peak Pulse Current - % of IPP RATED STAND-OFF VOLTAGE 0 05327.R0 9/10 5 10 15 t - Time - µs 20 25 0 30 Page 2 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 www.protekdevices.com 05327 PDLC05 Only One Name Means ProTek’Tion™ sot-23 package information outline dimensions dim millimeters A L inches min max min max A 2.80 3.04 0.110 0.120 B 1.20 1.40 0.047 0.055 C 0.89 1.11 0.035 0.044 D 0.37 0.50 0.015 0.020 G 1.78 2.04 0.070 0.081 H 0.013 0.100 0.001 0.004 J 0.085 0.177 0.003 0.007 K 0.45 0.60 0.018 0.024 L 0.89 1.02 0.035 0.040 S 2.10 2.50 0.083 0.098 V 0.45 0.60 0.018 0.024 3 B 1 0°-10° S 2 K V J G C D H NOTES 1. 2. 3. 4. Controlling dimension: inches. Dimensioning and tolerances per ANSI Y14.5M, 1985. Pin 3 is the cathode (Unidirectional Only) Dimensions are exclusive of mold flash and metal burrs. A pad layout dimensions dim millimeters inches min max min max A 0.71 0.97 0.028 0.038 B 1.88 2.13 0.074 0.084 C 0.71 0.97 0.028 0.038 D 0.81 1.07 0.032 0.042 B NOTES D 1. Controlling dimension: inches. 05327.R0 9/10 C Page 3 www.protekdevices.com 05327 PDLC05 Only One Name Means ProTek’Tion™ TAPE AND REEL P0 t 10 Pitches Cumulative Tolerance on Tape. ± 0.2 P2 D E Top Cover Tape Pin 1 A0 F W K0 B0 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P tmax 3.15 ± 0.10 2.77 ± 0.10 1.30 ± 0.10 1.55 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 0.228 Notes 1. 2. 3. 4. 5. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape. Suffix - T13 = 13” Reel - 10,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) & date code. Package outline, pad layout and tape specifications per document number 06012.R2 8/10. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty PDLC05 n/a -T7 3,000 7” n/a PDLC05 n/a -T13 10,000 13” n/a 05327.R0 9/10 Page 4 www.protekdevices.com 05327 PDLC05 Only One Name Means ProTek’Tion™ company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2010 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05327.R0 9/10 Page 5 www.protekdevices.com