05240 PLR0504F Only One Name Means ProTek’Tion™ ultra low capacitance steering diode/tvs array Description The PLR0504F is subminiature, ultra low capacitance steering diode/TVS suppressor array designed for the protection of sensitive IC components from the damaging effects of Electrostatic Discharge (ESD) and Electrical Fast Transients (EFT). This device is ideally suited for use in portable electronics such as SMART phones, laptops, and other wireless devices as well as gigabit Ethernet applications. The PLR0504F provides protection in accordance with IEC 61000-4-2 and IEC 61000-4-4 requirements. This device is available in a SC70-6L package configuration and is rated at 200 Watts peak pulse power (8/20µs) per line. SC70-6L package Features applications • Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV • Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns • 200 Watts Peak Pulse Power per Line(tp = 8/20µs) • ESD Protection > 25 kilovolts • Protects 4 Data Lines • Low Clamping Voltage • Ultra Low Capacitance: 1.9pF Typical • RoHS Compliant • REACH Compliant • SMART Phones • Portable Electronics • Gigabit Ethernet • USB 2.0, DVI, & Video Card Interfaces mechanical characteristics • Molded JEDEC SC70-6L Package • Approximate Weight: 7milligrams • Lead-Free Nickel Paladium Gold Plating • Solder Reflow Temperature: 260-270°C • Flammability Rating UL 94V-0 • 8mm Tape and Reel per EIA Standard 481 PIN CONFIGURATION 05240.R2 3/11 I/O 1 1 6 I/O 4 GND 2 5 REF I/O 2 3 4 I/O 3 Page 1 www.protekdevices.com 05240 PLR0504F Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS PPP 200 Watts Peak Pulse Power (tp = 8/20µs) - See Figure 1 TL -55 to 150 °C Storage Temperature Operating Temperature TSTG -55 to 150 °C Forward Surge Rating (1/120 seconds @ 25°C, IF = 10mA) VF 1.5 Volts ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER device marking PLR0504F A5 RATED STAND-OFF VOLTAGE (Note 1) MINIMUM BREAKDOWN VOLTAGE (Note 1) VWM VOLTS MAXIMUM CLAMPING VOLTAGE (Fig. 2) (Note 1) @ I P = 5A VC VOLTS MAXIMUM LEAKAGE CURRENT (Note 1) @ 1mA V(BR) VOLTS MAXIMUM CLAMPING VOLTAGE (Fig. 2) (Note 1) @ I P = 1A VC VOLTS maximum CAPACITANCE (Note 1) @V WM ID µA @0V, 1MHz Cj(SD) pF 5.0 6.0 15.0 25.0 3 1.9 NOTES 1. From I/O pin to ground. figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - Watts 10,000 1,000 200W, 8/20µs Waveform 100 10 0.1 05240.R2 3/11 1 10 100 td - Pulse Duration - µs Page 2 1,000 10,000 www.protekdevices.com 05240 PLR0504F Only One Name Means ProTek’Tion™ typical device characteristics figure 2 pulse wave form tf 100 Peak Value IPP 80 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs e-t 60 40 td = t/(IPP/2) 60 40 20 20 0 Peak Pulse Power 8/20µs 80 % Of Rated Power IPP - Peak Pulse Current - % of IPP 120 figure 3 power derating curve 0 5 10 15 t - Time - µs 20 25 0 30 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 figure 4 overshoot & clamping voltage 5 Volts per Division 35 25 15 5 -5 ESD Test Pulse - 25 kilovolt, 1/30ns (Waveshape) 05240.R2 3/11 Page 3 www.protekdevices.com 05240 PLR0504F Only One Name Means ProTek’Tion™ SC70-6L package information D outline dimensions dim millimeters min max min max A 1.90 2.15 0.074 0.084 B 1.15 1.35 0.045 0.055 C 0.80 1.00 0.031 0.040 D 0.15 0.30 0.005 0.012 E 0.65 BSC F E inches 6 4 5 1 3 2 L 0.026 BSC 1.30 BSC 0.80 1.10 0.031 0.043 J 0.08 0.25 0.003 0.010 K 2.00 2.40 0.078 0.095 L - 0.10 - 0.004 M 0.26 0.46 0.010 0.018 J B F 0.051 BSC G 0° - 8° K M A C G NOTES 1. Controlling dimension: inches. 2. Dimensioning and tolerances per ANSI Y14.5M, 1985. 3. Dimensions are exclusive of mold flash and metal burrs. pad layout dimensions millimeters inches NOMINAL NOMINAL A 0.50 0.020 B 1.30 0.051 C 0.65 0.026 D 1.72 0.068 E 0.60 0.024 dim B C E D A NOTES 1. Controlling dimension: inches. 05240.R2 3/11 Page 4 www.protekdevices.com 05240 PLR0504F Only One Name Means ProTek’Tion™ TAPE AND REEL P0 P2 D t 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Top Cover Tape A0 F W K0 B0 Pin 1 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P 2.25 ± 0.10 2.34 ± 0.10 1.22 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 tmax 0.25 Notes 1. 2. 3. 4. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T73 = 7” Reel - 3,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and pin one defined by dot on package. Package outline, pad layout and tape specifications per document number 06019.R5 3/11. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty PLR0504F -P -T73 3,000 7” n/a 05240.R2 3/11 Page 5 www.protekdevices.com 05240 PLR0504F Only One Name Means ProTek’Tion™ company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05240.R2 3/11 Page 6 www.protekdevices.com