05273 PLR3304 Only One Name Means ProTek’Tion™ ultra low capacitance steering diode/tvs array Description The PLR3304 is an ultra low capacitance steering diode/TVS array. This device is designed to protect computing applications such as gigabit Ethernet, USb and DVI interfaces as well as telecommunication equipment and systems. The PLR3304 is available in the space-saving DFN-10 package configuration and is rated at 400 Watts peak pulse current (8/20µs waveshape). This device meets the IEC 61000-4-2 (ESD), 61000-4-2 (EFT) and 61000-4-4 (Surge) requirements. At higher operating frequencies or faster edge rates, insertion loss and signal integrity are a major concern. This device in conjunction with passive components integrated into a TVS/filter network can be used for EMI/RFI protection. DFN-10 package Features applications • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge) • 400 Watts Peak Pulse Power per Line(tp = 8/20µs) • ESD Protection > 25 kilovolts • Low Clamping Voltage • Unidirectional Configuration • Protects 4 I/O Ports & Power Supply • Ultra Low Capacitance : 4pF • RoHS Compliant • REACH Compliant • Gigabit Ethernet • T1/E1, T3/E3 Chip Side Protection • Wireless Communications • USB & DVI Interfaces Mechanical characteristics • Molded JEDEC DFN-10 Package • Approximate Weight: 7 milligrams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 8mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 circuit diagram & PIN CONFIGURATION I/O 1 Pin 1 Pin 2 Pin 4 NC I/O 2 Pin 5 3 NC Vcc 4 5 7 6 GND Pin 3, 8 10 9 NC I/O 05273.R5 4/11 Page 1 8 NC I/O NC www.protekdevices.com 05273 PLR3304 Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature SYMBOL VALUE UNITS PPP 400 Watts TL -55 to 150 °C Storage Temperature TSTG -55 to 150 °C Peak Pulse Current - 8/20µs IPP 18 Amps ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER PLR3304 device marking 334 RATED STAND-OFF VOLTAGE MINIMUM snap-back VOLTAGE MINIMUM punch through vOLTAGE VWM VOLTS @ 50mA V(sb) VOLTS 3.3 3.3 MAXIMUM CLAMPING VOLTAGE (Fig. 2) (Note 1) @ IP = 10A VC VOLTS MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE i/o to gnd @ 5µA V(PT) VOLTS MAXIMUM CLAMPING VOLTAGE (Fig. 2) (Note 1) @ IP = 1A VC VOLTS @V WM ID µA @0V, 1MHz C pF 3.5 5.5 10.0 1.0 4.0 note 1. Pin 5 to ground. 05273.R5 4/11 Page 2 www.protekdevices.com 05273 PLR3304 Only One Name Means ProTek’Tion™ typical device characteristics figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - Watts 10,000 1,000 400W, 8/20µs Waveform 100 10 0.1 10 100 td - Pulse Duration - µs Peak Value IPP 80 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs e-t 60 40 10,000 figure 3 power derating curve Peak Pulse Power 8/20µs 80 % Of Rated Power tf 100 td = t/(IPP/2) 60 40 20 20 0 1,000 figure 2 pulse wave form 120 IPP - Peak Pulse Current - % of IPP 1 0 05273.R5 4/11 5 10 15 t - Time - µs 20 25 0 30 Page 3 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 www.protekdevices.com 05273 PLR3304 Only One Name Means ProTek’Tion™ typical device characteristics figure 4 overshoot & clamping voltagE 20 5 Volts per Division 10 0 -10 -20 ESD Test Pulse - 25 kilovolt, 1/30ns (Waveshape) figure 5 typical reverse voltage vs capacitance 5 C - Capacitance - pF 4 3 2 0 05273.R5 4/11 0 1 2 3 VR - Reverse Voltage - Volts Page 4 4 5 www.protekdevices.com 05273 PLR3304 Only One Name Means ProTek’Tion™ DFN-10 package information D outline dimensions dim A millimeters min max min max 0.45 0.55 0.017 0.021 A2 0.13 BSC e inches 1 D 2.50 2.70 0.097 0.105 D2 2.10 2.20 0.083 0.085 Pin 1 Reference E 2.50 2.70 0.097 0.105 TOP VIEW E2 1.21 1.31 0.046 0.051 e 0.50 BSC 0.020 BSC L 0.35 0.45 0.013 0.017 M 0.25 0.45 0.010 0.018 E2 E 0.005 BSC 5 D2 M L 10 6 BOTTOM VIEW A2 A SIDE VIEW NOTEs 1. Controlling dimension: millimeters. 2. Dimensioning and tolerances per ANSI Y14.M, 1985. 3. Coplanarity applies to the exposed pad as well as the terminals. A pad layout dimensions dim millimeters inches nominal nominal A 2.25 0.089 B 1.42 0.056 C 2.90 0.114 D 0.50 BSC 0.020 BSC E 0.30 0.012 F 0.58 0.023 B C F E D NOTES 1. Controlling dimension: millimeters. 05273.R5 4/11 Page 5 www.protekdevices.com 05273 PLR3304 Only One Name Means ProTek’Tion™ TAPE AND REEL D t Top Cover Tape P2 10 Pitches Cumulative Tolerance on tape ± 0.2 E P0 A0 F B0 K0 W Pin 1 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P 2.90 ± 0.10 2.90 ± 0.10 0.80 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 tmax 0.25 Notes 1. 2. 3. 4. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T73 = 7” Reel - 3,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and polarity dot. Package outline, pad layout and tape specifications per document number 06080.R0 3/11. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty PLR3304 -LF -T73 3,000 7” n/a 05273.R5 4/11 Page 6 www.protekdevices.com 05273 PLR3304 Only One Name Means ProTek’Tion™ company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2006 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05273.R5 4/11 Page 7 www.protekdevices.com