05239 PLW0501H Only One Name Means ProTek’Tion™ 250 Watt TVS COMPONENT Description The PLW0501H is a transient voltage suppressor array designed to protect applications such as wireless telecommunication devices, PCMCIA cards and portable electronics. This device is available in a unidirectional configuration with a working voltage of 5.0V and a minimum breakdown voltage of 6.0V. The PLW0501H is rated at 250W peak pulse power (8/20µs), which is sufficient protection for tertiary type lightning threats at key interface locations. The PLW0501H is ideally suited to protect data I/O ports against ESD and EFT. This device meets the requirements of IEC 61000-2 and IEC 61000-4-4. Packaged in a SC-79 configuration, this device can be substituted for similar 0803 outlines. SC-79 package Features applications • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns • 250 Watts Peak Pulse Power per Line (tp = 8/20µs) • Cable Discharge Event (CDE) Protection • Replacement for MLV (0803) • One Unidirectional Line of Protection • Unidirectional Configuration • RoHS Compliant • REACH Compliant • Ethernet - 10/100/1000 Base T • SMART Phones • Portable Electronics Mechanical characteristics • Molded JEDEC SC-79 Package • Approximate Weight: 2 milligrams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 8mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 PIN CONFIGURATION 1 2 05239.R4 8/11 Page 1 www.protekdevices.com 05239 PLW0501H Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 250 Watts Peak Pulse Current (tp = 8/20µs) IPP 16 Amps Operating Temperature TA -55 to 150 °C TSTG -55 to 150 °C TL 265 °C Storage Temperature Soldering Temperature for 10 seconds ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER PLW0501H 05239.R4 8/11 device marking U5 RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE typical forward VOLTAGE maximum clamping voltage (Fig. 2) @ IP = 16A VC VOLTS MAXIMUM LEAKAGE CURRENT TYpical CAPACITANCE @ 100ma VF VOLTS maximum clamping voltage (Fig. 2) @ IP = 5A VC VOLTS VWM VOLTS @ 1mA V(BR) VOLTS @VWM ID µA @0V, 1MHz C pF 5.0 6.0 0.8 9.8 12.5 5 120 Page 2 www.protekdevices.com 05239 PLW0501H Only One Name Means ProTek’Tion™ typical device characteristics figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - Watts 10,000 1,000 250W, 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse Duration - µs IPP - Peak Pulse Current - % of IPP 10,000 figure 2 pulse wave form 120 tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t/(IPP/2) 20 0 05239.R4 8/11 1,000 0 5 10 15 t - Time - µs Page 3 20 25 30 www.protekdevices.com 05239 PLW0501H Only One Name Means ProTek’Tion™ sc-79 package information outline dimensions dim millimeters C A inches min max min max A 1.10 1.30 0.043 0.049 B 0.70 0.90 0.028 0.035 C 1.50 1.70 0.059 0.066 D 0.50 0.70 0.020 0.028 E 0.08 0.20 0.003 0.008 F 0.30 BSE B F 0.012 BSE E NOTEs D 1. Dimensioning and tolerances per ANSI Y14.M, 1985. 2. Controlling dimension: millimeters. 3. Dimensions are exclusive of mold flash and metal burrs. A pad layout dimensions dim millimeters inches min max min max A 1.85 2.03 0.070 0.080 B 0.38 0.64 0.015 0.025 C 0.25 0.51 0.010 0.020 B C NOTES 1. Controlling dimension: millimeters 05239.R4 8/11 Page 4 www.protekdevices.com 05239 PLW0501H Only One Name Means ProTek’Tion™ TAPE AND REEL P0 D t Top Cover Tape P2 10 Pitches Cumulative Tolerance on tape ± 0.2 E A0 F K0 W B0 Pin 1 Indicated by Band P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P 1.00 ± 0.10 1.95 ± 0.05 0.075 ± 0.05 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 tmax 0.25 Notes 1. 2. 3. 4. 5. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Empty pocket between sprocket holes. Suffix - T73 = 7” Reel - 3,000 pieces per 8mm tape. Marking on Part - marking code (see page 2), polarity band and date code. Package outline, pad layout and tape specifications per document number 06037.R3 8/10. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty PLW0501H -LF -T73 3,000 7” n/a This device is only available in a Lead-Free configuration. 05239.R4 8/11 Page 5 www.protekdevices.com 05239 PLW0501H Only One Name Means ProTek’Tion™ company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05239.R4 8/11 Page 6 www.protekdevices.com