QUARTZCOM OCO

OCO-M36CEH
Through hole OCXO
HCMOS



Features
Applications: CDMA, networking, instrumentation
High frequency stability vs. temperature (up to ±7.5 x 10-9)
Wide operating temperature range: -40 up to +85 °C
Specification
Parameter
OCO-M36CEH5
Frequency range
Standard frequencies
Frequency stability
vs. operating temperature range
vs. supply voltage change
vs. load change
vs. aging after 30 days of operation
Short term stability
Output waveform
Output Load
Supply voltage
Steady state current consumption @ +25 °C
Warm up time
Frequency pulling range
Vcontrol (Vc) via external potentiometer (20 kΩ)
Reference voltage output (Vref)
Phase noise @ 20 MHz carrier frequency
Operating temperature range
Storage temperature range
Case height (H)
OCO-M36CEH12
10.0000 ~ 40.0000 MHz
10.00, 12.80, 13.00, 15.36, 16.00, 16.384, 20.00, 26.00, 30.72,
32.00, 32.768 & 38.40 MHz
 ±2.0 x 10-8
over -40 ~ +85 °C
 ±1.0 x 10-8
over -20 ~ +70 °C
 ±7.5 x 10-9
over -10 ~ +60 °C
-9
 ±5 x 10
±5 %
-9
±5 %
 ±5 x 10
 ±3 x 10-8
1st year
-11
< 2 x 10
Allan deviation per 1 s
HCMOS
VOH  4.5 V VOL  0.5 V
10 kΩ / 15 pF
+5.0 V 5 %
+12 V 5 %
< 200 mA
< 80 mA
-7
< 3 min
< 1 x 10 @ +25 °C
> ±5 x 10-7
positive slope
0 ~ +4.5 V
0 ~ +5.0 V
+4.5 V
+5.0 V
< -105 dBc/Hz @
10 Hz
< -135 dBc/Hz @
100 Hz
< -145 dBc/Hz @
1 kHz
< -150 dBc/Hz @
10 kHz
-10 ~ +60 °C, -20 ~ +70 °C, -40 ~ +70 °C or -40 ~ +85 °C
-55 ~ +85 °C
16.0 mm
Environmental test
vibration
shock
acceleration: 5 g; 10 Hz up to 500 Hz and down to 10 Hz; all 3 axes, 4.5 h/axis
100 g, half-sine, 3 ms
(3 shocks each, 6 directions)
Pin function
#1
#2
#3
#4
#5
Vc
Vref
Vdc
RF output
GND
Circuit diagram
CBP = 0.01 mF
Zout = 10 k // 15 pF
2002/95/EC RoHS compliant
QuartzCom AG
[email protected]
www.quartzcom.com
QuartzCom Asia
[email protected]
QuartzCom USA
[email protected]
12 May. 10