VT7-302 SMD VC-TCXO Clipped sine wave Features Applications: mobile communications, GPS Small, low profile package: 3.2 x 2.5 x 1.0 mm Output signal clipped sine wave Low phase noise Parameter Specification Frequency range Standard frequencies Frequency stability: 10 ~ 40 MHz 10.0, 12.8, 16.384, 19.2, 20.0, 24.0, 25.0, 26.0, 38.4 & 40.0 MHz vs. temperature ≤ ±0.5 ~ ±2.5 ppm vs. supply change ≤ ±0.2 ppm ±5 % vs. load change ≤ ±0.2 ppm ±5 % vs. aging ≤ ±1.0 ppm st 1 year Frequency slope of perturbations ≤ ±0.2 ppm/°C frequency measurement every 2 °C Static temperature hysteresis ≤ ±0.6 ppm Frequency tolerance ex. factory ≤ ±1.0 ppm Supply voltage +2.4 ~ +5.0 V Supply current < 2.0 mA Output signal > 0.8 Vp-p Output load 10 kΩ // 10 pF Frequency pulling range ±5 ~ ±10 ppm Voltage control +1.5 V ±1.0 V Phase noise @ 19.2 MHz carrier frequency -145 dBc/Hz @ 10 kHz Operating temperature range commercial application industrial application Storage temperature range -20 ~ +70 °C -40 ~ +85 °C -55 ~ +125 °C Packaging units tape & reel 1’000 or 2’500 pieces @ +25 °C clipped sine wave Customer specifications on request Pin function #1 #2 #3 #4 Example for solder pattern Vc Voltage control GND Output Vdc Do not design any conductive path between the pattern Example for IR reflow soldering temperature 2002/95/EC RoHS compliant QuartzCom AG [email protected] www.quartzcom.com QuartzCom Asia [email protected] QuartzCom USA [email protected] 02 May. 10