VTE-205A Through hole VC-TCXO Clipped sine wave Features Applications: mobile communications, instrumentation Frequency range up to 200 MHz Tight frequency stability vs. temperature Low phase noise Specification Parameter VTE-205A3 Frequency range VTE-205A5 9.6 ~ 200 MHz Standard frequencies 10.00, 12.80, 13.00, 16.384, 20.00, 25.00, 38.40 & 40.00 MHz Frequency stability: vs. temperature ≤ ±0.5 ~ ±2.5 ppm vs. supply & load change vs. aging ≤ ±0.2 ppm ≤ ±1.0 ppm ±5 % 1st year ≤ ±0.5 ppm @ +25 °C Frequency tolerance ex. factory +3.3 V ±5 % Supply voltage Supply current +5.0 V ±5 % 5 ~ 40 mA Output signal > 1.0 Vp-p clipped sine wave Output load 10 kΩ // 10 pF ±10 ~ ±25 ppm Frequency pulling range +1.65 V ±1.50 V > ±5 ppm -30 ~ +75 °C -40 ~ +85 °C +2.5 V ±2.0 V with internal trimmer commercial application industrial application -55 ~ +125 °C cardboard box 50 pieces Voltage control Frequency adjustment (optional) Operating temperature range Storage temperature range Packaging unit Customer specifications on request Pin function #1 #2 #3 #4 #5 Vdc Supply voltage RF Output GND Vc Voltage control GND Phase noise @ 20 MHz -100 dBc/Hz -130 dBc/Hz -145 dBc/Hz -150 dBc/Hz -155 dBc/Hz @ 10 Hz @ 100 Hz @ 1 kHz @ 10 kHz @ 100 kHz Environmental & Mechanical specification Shock Vibration Solderability Seal integrity MIL-STD-883C, Method 2002, Con B MIL-STD-883C, Method 2007, Con A MIL-STD-883C, Method 2003 MIL-STD-883C, Method 2014, Con C&A2 2002/95/EC RoHS compliant QuartzCom AG [email protected] www.quartzcom.com QuartzCom Asia [email protected] QuartzCom USA [email protected] 02 May. 10