Part No. DP0V-1MBA DP0V pump, 1/8" male NPT gauge adapter, hose, process connection Perform very precise low pressure calibration or differential pressure calibration using an attached gauge or calibrator (gauge and calibrator not included) Features • Light weight, compact pump generates up to 100 psi (7 bar) with ease • Large volume fine adjustment piston provides precise control, even at very low pressures • Modular design makes field maintenance quick and easy • Precisely vent pressure with soft seated bleed valve • Two outlet ports provide connections for both pressure reference and for device under test thus eliminating a tee DP0V-1MBA • Low volume Quick-test hose, gauge adapter and process connection can be attached to pump without thread sealant or a wrench • Rugged, all metal construction reduces pressure changes due to temperature fluctuations • Made in U.S.A. Item Includes • Hand Pump - DP0V Assembly (DP0V) • Gauge Adapter - 1/8" male NPT x female QT, no check-valve, brass (QTHA-1MBA) • Hose - Quick-test hose, brass hose ends, 3 ft (92 cm) long (QTQT-HOS-3ft) • Hose Adapter - 1/4" male NPT x male QT, no check-valve, brass (QTHA-2MB0) Specifications Pressure Range 0 to 100 psi (0 to 7 bar) Media Air Outlet Port1 Male Quick-test, brass Outlet Port2 Male Quick-test with cap and chain, brass Temperature Range 0 to 130 °F (-18 to 54 °C) Construction Anodized Aluminum, Brass, Stainless Steel Seal Materials Buna-N, Delrin, Teflon Fine Adjust Resolution ±0.01 psi Weight 1.57 lb (0.7 kg) Dimensions H: 2.88 in (7.3152 cm) x W: 7.93 in (20.1422 cm) x D: 3.5 in (8.89 cm) Ralston Instruments Inc. | ralstoninst.com | Toll Free 800-347-6575 | Phone 440-564-1430 | Fax 440-564-1480